Question why am i hitting powerlimit so early?

[grusballe]

I have a gtx 1070ti and a 9700k.
When i do a time spy test it sometimes crashes and i asume that is becuse im hitting the powerlimit on my gpu, i have made it 20% higher using msi afterburner, and since i have 750w psu that should not be an issue right?
made my coreclock 100 higher and my memory clock 300 higher.
im at 50-60c and i think i can get more out of my gpu, but i think my gpu is using as much power as it can. Nothing is maxed out except the powerlimitor. i have seen people with same card as me push alot higher without it crashing. Any tips?

 

[shknawe]

Set core voltage slider to 100%---Set power limiter to max/120%--Set temp limit to 92--Set core clock to 150--Set memory clock to 400. Set fan curve to cool a bit faster. You should be good to go.

 

[grusballe]

Set core voltage slider to 100%---Set power limiter to max/120%--Set temp limit to 92--Set core clock to 150--Set memory clock to 400. Set fan curve to cool a bit faster. You should be good to go.

core voltage to 100 or +100?

this is the graph of my power limit and voltage limit and no load limit:

 

[shknawe]

sorry core voltage all way to right.

 

[shknawe]

Don't forget to go into fan settings and cool it a little more aggressively for these settings. Here is mine still doesn't get loud. http://prntscr.com/mtizey

 

[grusballe]

Don't forget to go into fan settings and cool it a little more aggressively for these settings. Here is mine still doesn't get loud. http://prntscr.com/mtizey

i asumed core voltage would be max.
Yea, i do have a aggressive fan curve now, thanks

 

[TJ Hooker]

If you're hitting the power limit it should be throttling back the frequency, not crashing.

 

[shknawe]

i asumed core voltage would be max.
Yea, i do have a aggressive fan curve now, thanks

I don't know what your fam speed curve is but it should never be 0, you are already starting out warm, mine at idle is 23 degrees c, I see on your pic it is idle at 35 Celsius.