[SOLVED] Why do I keep getting multiple BSODs and have bad coditions on my PC?

Jun 15, 2019
8
0
10
0
My PC has been in a bad state for a long time, I've tried to find out what's wrong with it and some things were fixed. However I keep getting these weird BSODs and PC faults that shouldnt be happening.
Here are the specs
CPU: Intel i5-2310
PSU: Seasonic G series 650W
OS: Wibdows 7 Ultimate 64bit SP1
Motherboard: GA-Z68A-D3H-B3
RAM: Buffalo DDR3 D3U1600-B4GBJ 8GB
UMAXCetus DCDDR3-8GB-1333
GPU:AMD Radeon HD7870
HDD: Toshiba DT01ACA050 SCSI Disk Device 500GB
Now I;ll post the BSODs that has happened so far

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 19
BCP1: 0000000000000003
BCP2: FFFFFA800C6D4DA0
BCP3: FF7FFA800C6D4DA0
BCP4: FFFFFA800C6D4DA0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\061319-25911-01.dmp
C:\Users\Junkiewolf\AppData\Local\Temp\WER-61199-0.sysdata.xml

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1a
BCP1: 0000000000041790
BCP2: FFFFFA8009C9B550
BCP3: 000000000000FFFF
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\061319-32120-01.dmp
C:\Users\Junkiewolf\AppData\Local\Temp\WER-91166-0.sysdata.xml

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 10d
BCP1: 0000000000000005
BCP2: 0000000000000000
BCP3: 0000000000001024
BCP4: FFFFFA8014B01010
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\061519-29078-01.dmp
C:\Users\Junkiewolf\AppData\Local\Temp\WER-73336-0.sysdata.xml

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050033
BCP3: 00000000000406F8
BCP4: FFFFF800031D19F8
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\061519-112788-01.dmp
C:\Users\Junkiewolf\AppData\Local\Temp\WER-517704-0.sysdata.xml

The first two happened while I was on the browser trying to open a program iirc, and the the last one was when I tried to start a game.

It's a lot to take in, so if anyone can help me that would be very much appreciated. If there is anymore information that I can provide, I am willing to do so.
 
Last edited:

cherry blossoms

Reputable
Apr 13, 2016
619
13
5,365
155
Based on your bug check codes, going to guess memory problem.

Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails

Bug Check 1A is a Bad Memory Pool Header

Your memory sticks appear to be mismatched. Pull one of them and test. Either/both could be faulty, or they could just not be playng nice together
 

cherry blossoms

Reputable
Apr 13, 2016
619
13
5,365
155
RAM is best purchased in matched pairs if you need a pair. Even lot to lot variations may cause subtle problems from the same distributor. Recommend a quality manufacturer.

Unlikely it is virtual memory (the hard drive). You can disable virtual memory to test this if needed.
 
Jun 15, 2019
8
0
10
0
Ok thanks, so far the BSODs aren't happening with the two RAMs so ill stick with those two for now. In the meantime I'll look for a better pair that I can get so it works better than the situation now. Which ones are good now?
 

ASK THE COMMUNITY

TRENDING THREADS