Question Why is my RTX 2070 SUPER Memory Clock at 7000 MHz when it should be at 14000 MHz?

[SoraKyo]

https://imgur.com/a/pqBpfAg

View: https://imgur.com/a/pqBpfAg

 

[hotaru.hino]

It's likely reporting the actual clock speed it's running at, rather than the transfers per second the spec lists.

The "DDR" in GDDR stands for double data rate, which means it transfers data on both the rising and falling edge of the clock cycle.

 

[SoraKyo]

It's likely reporting the actual clock speed it's running at, rather than the transfers per second the spec lists.

The "DDR" in GDDR stands for double data rate, which means it transfers data on both the rising and falling edge of the clock cycle.

so 7000Mhz actualy means 14000Mhz

 

[hotaru.hino]

so 7000Mhz actualy means 14000Mhz

More or less, but it's more correct to say 14,000 MT/s (Megatransfers/second).

 

[hotaru.hino]

Don't mind the double post but OP already saw my last one

I wanted to add that GDDR5X and GDDR6/X actually has quad data rate and apparently octal data rate modes, despite using the DDR moniker. So the clock speeds may be reported to be even slower.

 

[SoraKyo]

Don't mind the double post but OP already saw my last one

I wanted to add that GDDR5X and GDDR6/X actually has quad data rate and apparently octal data rate modes, despite using the DDR moniker. So the clock speeds may be reported to be even slower.

so there isn't anything i should be worried about

 

[hotaru.hino]

so there isn't anything i should be worried about

Correct. As long as the clock speed is going up significantly higher under load than idle, it's fine.