[SOLVED] Why is there a instability when i try to run DOCP can someone tell me how to fix so i can run ram at 3200mhz

[Hoff]

Motherboard:Tuf B450m plus gaming
CPU:ryzen 3 3200g
ram:G.skill 16gb 3200mhz 2*8

 

[JohnBonhamsGhost]

have you verified that the memory is in the motherboard QVL and is supported?

 

[Hoff]

have you verified that the memory is in the motherboard QVL and is supported?

i checked QVL for ram it says its supports the motherboard. Then i checked the QVL for motherboard for ryzen 3000 series compatibility and i couldint find does that mean that i can not run at 3200 mhz?

 

[gskill support]

Do you have the latest BIOS? Try one module at a time to see if it can be stable.

You can also manually set to DDR4-2933 or other (with XMP enabled) to see if it can work better.

 

[sizzling]

Do you have the RAM in A2 & B2?

 

[dorsai]

As sizzling said above you need to be in slots A2 and B2.

Also you should verify the voltage is set properly for the memory as many docp/XMP profiles require 1.35v while the motherboard will default to 1.20v in a lot of cases.

 

[Hoff]

Do you have the RAM in A2 & B2?

Ill try again i already tried to put ram in a2 b2 but screen would get no signal and im pretty sure they where in properly

 

[Hoff]

As sizzling said above you need to be in slots A2 and B2.

Also you should verify the voltage is set properly for the memory as many docp/XMP profiles require 1.35v while the motherboard will default to 1.20v in a lot of cases.

Do you have the RAM in A2 & B2?

Ok update i got it to work in b2 a2 slots so thank you everyone