Question Why won’t my XMP Profile work properly?

[AidanAins]

In my BIOS, I have my XMP profile set to DDR4 3200 as shown here (

https://imgur.com/a/e7IN6Xz

View: https://imgur.com/a/e7IN6Xz
)
But when I then save those changes and boot up my pc, and check CPU-Z it still says the RAM is running at 1064mhz (

https://imgur.com/a/9aHIvLt

View: https://imgur.com/a/9aHIvLt
) which I understand means the ram is running at 2128mhz in dual channel. But why isn’t it running at the correct speed I have set it to in the BIOS?

 

[JohnBonhamsGhost]

it looks as though you have 2133 selected in the BIOS under the available XMP profile, not 3200.

 

[AidanAins]

it looks as though you have 2133 selected in the BIOS under the available XMP profile, not 3200.

That setting I can’t change, it’s greyed out

 

[CountMike]

That setting I can’t change, it’s greyed out

Try enabling RAM training, it might pick it up automatically.
Make sure RAM is in right slots.
set DRAM to 1,35v.

 

[AidanAins]

Try enabling RAM training, it might pick it up automatically.
Make sure RAM is in right slots.
set DRAM to 1,35v.

I have set DRAM to 1.35v and it still hasn’t worked, I’ve also realised that my motherboard is showing my RAM as being 2133 mhz instead of 3200 here (

https://imgur.com/a/hkUBsRp

View: https://imgur.com/a/hkUBsRp
) this is probably the problem, but why is this happening?

 

[CountMike]

I have set DRAM to 1.35v and it still hasn’t worked, I’ve also realised that my motherboard is showing my RAM as being 2133 mhz instead of 3200 here (

https://imgur.com/a/hkUBsRp

View: https://imgur.com/a/hkUBsRp
) this is probably the problem, but why is this happening?

Which exact MB is that. I think it's AB350M and on whole 300 chipset series RAM working above 2933MHz is almost impossible to work, maybe some with Samsung b.die only.
Is there another, lower XMP ?

 

[scout_03]

compare the spd jedec settings with the memory tab to see how far it could go you could post apicture of the spd page here .