Ok... I've read through this site over and over again.. Can someone tell me where I am going wrong.
My aim is to get internet to my garage 500m from my house which is on a different electrical circuit to the house (therefore the obvious plug in adaptors and bridges sadly don't work) I want the printers in the garage to be useable from the house and the network to be continuous from house to garage if poss.
I have just bought a fancy new tplink router to replace my bt home hub which is working fine.
Currently I have the tp link router set up to ssid (housewifi) password let's suppose it's (password) which is supplying the house with wifi.
From the tplink I have run an Ethernet cable to a through the mains router sending it upstairs to a wag102 which is set up as an access point with an enhanced ariel. The access point I have set to the same ssid and password with an ip address of let's say 192.168.0.278.
In the garage I have a second wag102 again on the same ssid and password but on have used say 192.168.0.279 set up as multi point to accesspoint setting.
It all connects nicely, in the house the wifi switches seamlessly, but in the garage although it connects, there is no internet access.....
Is there anything glaring wrong with what I've done?
My aim is to get internet to my garage 500m from my house which is on a different electrical circuit to the house (therefore the obvious plug in adaptors and bridges sadly don't work) I want the printers in the garage to be useable from the house and the network to be continuous from house to garage if poss.
I have just bought a fancy new tplink router to replace my bt home hub which is working fine.
Currently I have the tp link router set up to ssid (housewifi) password let's suppose it's (password) which is supplying the house with wifi.
From the tplink I have run an Ethernet cable to a through the mains router sending it upstairs to a wag102 which is set up as an access point with an enhanced ariel. The access point I have set to the same ssid and password with an ip address of let's say 192.168.0.278.
In the garage I have a second wag102 again on the same ssid and password but on have used say 192.168.0.279 set up as multi point to accesspoint setting.
It all connects nicely, in the house the wifi switches seamlessly, but in the garage although it connects, there is no internet access.....
Is there anything glaring wrong with what I've done?