Will I have problems with the Noctua cooler & compatibility in this build?

[pearlimint]

If there will be compatibility issues, what high quality fan CPU cooler should I get instead if I'm going to overclock the ryzen 7?

https://imgur.com/gallery/N6yE9Bs

 

[profoundnoah]

What cooler are you going to be using? Is there a link that I cant see? Most Noctua coolers have an AM4 revision so you don't have to buy a separate bracket. Otherwise, you can buy basically any Noctua cooler you want, just be sure that it's supported by the bracket. https://www.amazon.com/Noctua-NM-AM4-Mounting-coolers-platforms/dp/B01MTEFT52/ref=sr_1_3?ie=UTF8&qid=1530241684&sr=8-3&keywords=Noctua+am4+bracket&dpID=41q1yNM3NwL&preST=_SY300_QL70_&dpSrc=srch

 

[pearlimint]

What cooler are you going to be using? Is there a link that I cant see? Most Noctua coolers have an AM4 revision so you don't have to buy a separate bracket. Otherwise, you can buy basically any Noctua cooler you want, just be sure that it's supported by the bracket. https://www.amazon.com/Noctua-NM-AM4-Mounting-coolers-platforms/dp/B01MTEFT52/ref=sr_1_3?ie=UTF8&qid=1530241684&sr=8-3&keywords=Noctua+am4+bracket&dpID=41q1yNM3NwL&preST=_SY300_QL70_&dpSrc=srch

Sorry, it didn't add my link to the original post. I edited it and it should be working now. I arranged the parts on pcpartpicker and it said there might be a compatibility issue, and as I don't know much about building PCs I don't know how to verify it myself.

 

[Karadjgne]

Personally I'd opt for the newer NH-D15S over the older NH-D15, the S version is offset giving greater ram and gpu clearance but has similar performance.

You can post PCPartPicker links directly using the [bb] button at the top of the page and cut/paste.

 

[profoundnoah]

The only compatibility issue would be with your case- The NH-D15 with the fan comes in at a height 160mm, while your case supports up to 170mm coolers. Given how case manufacturers like to advertise their compatibility, there may be a bit of deviancy to these numbers. Should still fit just fine, but it will be pretty close should you choose a dual-tower heatsink.