Will not power up and lights are on

[peteraryan]

Custom Built PC with AMD processor and board.

I have had the machine for about a month and it has been working great. I powered my machine off last night and this morning it would not turn on.

I attempted to change outlets, use the direct power on mb and tried other hardware in outlet. None of those solved issue.

Normally I would assume that it is a psu issue however the led lights on the mb are working properly.

Only notable thing about environment is that I keep my room cold, in the 50 degree F range last night. Could it do damage if it got too cold?

Hope that you all can help. Thank you in advance.

 

[ExtremelyGeeky]

Perhaps try another psu, the mobo lights are led, they take almost zero power to light up...it's possible your psu is the issue entirely as it simply may not be outputting enough power to run the system. Of course before purchasing another psu I'd make sure all the connections are secure, that nothing came half unplugged or anything. Also you can try booting with everything disconnected for example leave just the cpu and a stick of ram installed. If it boots then I'd say the psu isn't putting out enough power to run your system.
Hope this helps.

 

[peteraryan]

Perhaps try another psu, the mobo lights are led, they take almost zero power to light up...it's possible your psu is the issue entirely as it simply may not be outputting enough power to run the system. Of course before purchasing another psu I'd make sure all the connections are secure, that nothing came half unplugged or anything. Also you can try booting with everything disconnected for example leave just the cpu and a stick of ram installed. If it boots then I'd say the psu isn't putting out enough power to run your system.
Hope this helps.

Thank you, I pulled out an old psu and tried it with just cpu and mb and it powered. I hope that the warranty process is easy. Happy new year to you.

 

[ExtremelyGeeky]

No problem man, Happy new years to you too!