Will this GPU fit in this case?

[romethaug28]

I can´t find dimensions to these components. So i have to ask you guys!
Will this GPU fit?
GPU: https://www.gigabyte.com/Graphics-Card/GV-N105TOC-4GD-rev-10-rev11-rev12#kf

Case:https://arvutitark.ee/est/tootekataloog/Arvutikomponendid-Korpused-ATX-korpused/PC-kast-ilma-toiteplokita-iBOX-Force-1810-193117

Just in case adding motherboard: https://www.amazon.com/ThinkCentre-Desktop-Motherboard-03T8351-IS6XM/dp/B0188ZJX8I
The thing is i need a case what has in front panel 2 USB 2.0 slots. If you know any, please tell!
All advice is welcomed!

 

[marksavio]

it will be very hard to search for that case. do you know the english translation to that chassis?
im not sure if that is sold internationally as well. usually most brands will post a PDF manual of their chassis on their supprot sites where you can see the exact dimensions or specific notes on clearances.

but since its a midtower ATX case, generally it should fit. i wouldnt worry too much. unlike smaller cases like ITX or smaller. you dont have to worry about height or distance from PSU. or width clearance to the front chassis fans plus radiator.

 

[madmatt30]

That 1050ti is less than 200mm long

Its actually shorter than an matx board so it should fit in pretty much any standard width case.

I dont see an issue there at all.

 

[romethaug28]

it will be very hard to search for that case. do you know the english translation to that chassis?
im not sure if that is sold internationally as well. usually most brands will post a PDF manual of their chassis on their supprot sites where you can see the exact dimensions or specific notes on clearances.

but since its a midtower ATX case, generally it should fit. i wouldnt worry too much. unlike smaller cases like ITX or smaller. you dont have to worry about height or distance from PSU. or width clearance to the front chassis fans plus radiator.

Thank you so much! i run into so many problems with my PC parts and it is so good when someone helps you out!

 

[romethaug28]

That 1050ti is less than 200mm long

Its actually shorter than an matx board so it should fit in pretty much any standard width case.

I dont see an issue there at all.

Thank you so much! i also found out from the internet that case has no cooler. Is that very bad? and i can buy a cheap cooler too for it!