[SOLVED] Will this graphics card fit in my case?

[ThatSourMelon]

I want to replace my Rx 580 gaming x 8gb with an Rx 5700 xt red devil. The red devil seems a little large, when I put it in pcpartpicker it says it will fit in my case but it could block some of my components. I don’t think I have anything in the way but I just want to make sure. Also, I herd that you need an 8-pin power connector to plug it in because it has a large power draw, I think I have a 4+2 or 6+2 pin psu, does that mean I can’t use it? Do I have the right cables for this? Here is my complete parts list after upgrades:

Saved Part Lists

pcpartpicker.com

Sorry if this is a stupid question, I just want to make sure and not buy anything I can’t use, I’m a little new to the pc building thing and this is my first graphics card upgrade.

 

[jeremyj_83]

The RX 5700 XT is 300mm in length and the case supports cards up to 395mm in length. Even if the fans cut into the 395mm then fans are only 25mm thick so that leave 370mm of length.

 

[ThatSourMelon]

The RX 5700 XT is 300mm in length and the case supports cards up to 395mm in length. Even if the fans cut into the 395mm then fans are only 25mm thick so that leave 370mm of length.

Thanks! That’s a relief. And do I have the power connectors to hook it up? Is it all good to get this thing?

 

[jeremyj_83]

Thanks! That’s a relief. And do I have the power connectors to hook it up? Is it all good to get this thing?

Yes you do. The PSU comes with 4x 6+2 pin PCIe Power cables. The GPU requires 2x 8pin so you are fine.

 

[thekillerx10]

Thanks! That’s a relief. And do I have the power connectors to hook it up? Is it all good to get this thing?

6+2 is the same as 8 pin also this psu is really good