Hi,
I have just built this brand-new PC (specs below + Image links to build).
But I am arguing with a person weather or not I should install 2 front panel case fans for intake cooling. The other person (who is not computer experience) says you don't need 2 front fans on the case.
While I am thinking about when the person plays lots of high graphic games in the future with this build. The PC will be getting very hot inside, so my question to you is do I need front case fans for this build?
Current PC build link: https://prnt.sc/rg7hbb
Should I order these fans for the front case if needed 2 of them?: https://www.amazon.co.uk/ARCTIC-F12-Silent-Ultra-Quiet-Configuration/dp/B0119T0D4I/ref=sr_1_3?tag=georiot-trd-21&keywords=120mm+pc+fan&qid=1584119789&sr=8-3&ascsubtag=tomshardware-8350890168698881000-21
Splitter for the power-supply Molex cable to connect the fans: https://www.amazon.co.uk/KabelDirekt-20-20-20cm-3-pin-2-pole-connector-fan-distribution/dp/B01LFCB3TS/ref=sr_1_3?tag=georiot-trd-21&keywords=4-pin+molex+3x3+pin&qid=1584117447&sr=8-3&ascsubtag=tomshardware-3417987975101894700-21
Pictures of the build if needed:
Link 1: https://prnt.sc/rg7j39
Link 2: https://prnt.sc/rg7j7s (front of case)
Link 3: https://prnt.sc/rg7jc5 (As you can see the PSU fan is facing down)
I have just built this brand-new PC (specs below + Image links to build).
But I am arguing with a person weather or not I should install 2 front panel case fans for intake cooling. The other person (who is not computer experience) says you don't need 2 front fans on the case.
While I am thinking about when the person plays lots of high graphic games in the future with this build. The PC will be getting very hot inside, so my question to you is do I need front case fans for this build?
Current PC build link: https://prnt.sc/rg7hbb
Should I order these fans for the front case if needed 2 of them?: https://www.amazon.co.uk/ARCTIC-F12-Silent-Ultra-Quiet-Configuration/dp/B0119T0D4I/ref=sr_1_3?tag=georiot-trd-21&keywords=120mm+pc+fan&qid=1584119789&sr=8-3&ascsubtag=tomshardware-8350890168698881000-21
Splitter for the power-supply Molex cable to connect the fans: https://www.amazon.co.uk/KabelDirekt-20-20-20cm-3-pin-2-pole-connector-fan-distribution/dp/B01LFCB3TS/ref=sr_1_3?tag=georiot-trd-21&keywords=4-pin+molex+3x3+pin&qid=1584117447&sr=8-3&ascsubtag=tomshardware-3417987975101894700-21
Pictures of the build if needed:
Link 1: https://prnt.sc/rg7j39
Link 2: https://prnt.sc/rg7j7s (front of case)
Link 3: https://prnt.sc/rg7jc5 (As you can see the PSU fan is facing down)