Will This PSU Fit in a Micro ATX Case?

[turkey3_scratch]

Here is what I am thinking: http://www.microcenter.com/product/427099/430W_80_Watt_ATX_Power_Supply

Would that fit in a micro ATX case? I understand the form factor it says is ATX, but does that mean full-sized ATX or just ATX in general (rather than ITX)?

 

[rolli59]

It will fit a minitower that is one form of mATX case! Specific case would help to determine?

 

[Keemann]

Yes it would fix in an Micro ATX case. The ATX and Micro ATX cases have the same room for a PSU. The ITX would need an ITX PSU.

 

[geofelt]

M-ATX refers to a smaller sized motherboard, not to a psu.
Virtually any M-ATX case will not be a problem unless the psu is unusually strong and long.
The one you linked will fit anywhere.
What case and motherboard are you considering?

 

[rolli59]

Some mATX desktop cases do not take std PSU's so important to know which case for sure.

 

[turkey3_scratch]

The case is Rosewill FBM-01.

 

[rolli59]

Yes fit that fine!

 

[turkey3_scratch]

Thanks!

 

[geofelt]

The PSU is fine. What is the rest that will go in the case?
For starters, you need a M-ATX motherboard or ITX motherboard.

If you will have any hot components, like dedicated graphics, you might want to consider a different case. The airflow of the Rosewill FBM-01 is minimal.

 

[turkey3_scratch]

The PSU is fine. What is the rest that will go in the case?
For starters, you need a M-ATX motherboard or ITX motherboard.

If you will have any hot components, like dedicated graphics, you might want to consider a different case. The airflow of the Rosewill FBM-01 is minimal.

It's already been built, I just need to replace the PSU. It's a web server not for gaming.

 

[geofelt]

Then you are good.