Will this PSU run a HD4870?

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
My current setup:

E8400 3ghz
GA-P31-DS3L
EN7300GS
Akasa AK-965
Generic PS-X550-12 550W PSU
WinXP
3 Maxtor HDD's (2x 320GB, 1x 150GB)
Generic DVD RW Drive

This PSU ran my X1950Pro with no trouble (before I screwed the Graphics card up) and I was wondering whether it would run a HD4870PCS+ 1GB?
I have one free molex at the moment, I shall have to use a Y-splitter for my HDD's so I can free up another molex. Then I shall use 2 molex to 6pin pci-e converters. Is this a good idea? Or should I concede to replacing my PSU with another that has 2 6pin pci-es already? Any recommendations for another PSU for less than £50 that does the job? (if mine doesn't...)
 

tortnotes

Distinguished
Jul 31, 2009
295
0
18,810
Look at the label on the side and see how much amperage you have on the 12V rails.

Generic PSUs aren't a great idea, but it should run fine if you have an extra 15 or so amps on your 12V rail. Almost everything in your computer runs on 12V.

Although using those molex to PCI-ejavascript:%20validform(this); adapters isn't really a great idea.
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
well i don't quite understand these details but here is what it says:

+3.3v - 28A - 280W (Max)
+5V - 50A - same as above (Max)
+12V - 18A - 216W (Max)
Max Total 492W

Is this sufficient?
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
Thanks for the response. I have now bought another PSU.
My budget has forced me to buy a PowerCool PSUPC750AUBA 750W 80+ Dual 12v V2.2 High Efficiency Black PSU.
It has dual rail, 16amps and 18amps respectively, and 2 pci-e 6 pin connectors. Will this one work???
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
based on replies here, there is still the chance for me to cancel my order, if the PSU in question is not good enough. RRP is between £50-55 at most places I can find....
 

I would, then again, I wouldn't have ordered it in the first place
Only 2 PCIE connectors on a 750w ?
34 amps ( maybe ) on 2 x 12v rails ? My Antec 500 can do that.
80+ ? You won't find it ( or any "Powercool" ) on thier list;
http://www.80plus.org/

Let the community know where you are purchasing from and you might get some better reccomendations.
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
OK I am still a novice with PC hardware, so I am listening to those more learned than me, and getting that OCZ Fatal1ty obsidian mentioned. I've just sent off a message to play.com asking to cancel my order, an automated message came back saying they will contact me in the next 72 hours.
So regarding this new OCZ PSU, it says it has a 6pin pci-e and 6+2pin pci-e. Do I load the the graphics card onto rail 12v2 through the two pci-e's supplied, and pile everything else on 12v1? i.e MB, 3xHDD's, DVDRW.
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
Oh good. Best to be safe than sorry. I'de rather pay £20 more for an overkill PSU than get one which may or may not work.
Thanks for all the advice. If you don't hear from me again about this matter, it is safe to say I have everything sorted :)
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
Hehe, where would I be without the help of you guys on this great forum.
One last question for the time being, regarding the OCZ Fatal1ty 550W:
It is a modular PSU, as I have seen from the plethora of reviews; the only cables that are fixed are the 20-24 MB and 4 and 8 pin CPU cables. Seems like a stupid question, but which 12v rail are the fixed cables on?
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
Sorry I wasn't clear about my question. Which +12V rail is the 24pin MB cable and 4pin CPU powercable allocated to? +12V1, or +12V2? Just so I know which rail to allocate my graphics card to.
 

Unless someone opens one and traces the wires it's hard to say.
The standard dual rail configuration is cpu on one rail and everything else on the other, you don't get a choice.
 

afortiori

Distinguished
Dec 24, 2009
62
0
18,630
well that sucks. I want my CPU, HDD's, MB and DVDRW on +12v1, and my HD4870 exclusively using +12v2. Are you saying thats not possible with the OCZ Fatal1ty? I dout one 20amp rail could run that graphics card, 3 HDDs AND a DVDRW, and the e8400 having 1 20amp rail to itself is major overkill, isn't it?