Will this PSU work with my build?

[PeppermintFangs]

My new PC build keeps crashing. Some people have suggested it's the power supply that's causing the problem, mainly because it's multi-rail rather than single-rail. However, after looking it up online, many other suggest this is hardly a factor. It's also worth mentioning that the system I have listed on my profile was run flawlessly by this power supply.

So I'll leave it to the community - do you guys think the EVGA Supernova NEX650W 80+ Gold Certified PSU is enough to run the configuration below? If not, and you think it's causing the crashes, what PSU (preferably under $80, but under $100 will do) do you suggest?

https://pcpartpicker.com/list/pC3NxY

Thanks in advance for your help!

 

[elbert]

I would first suggest doing a few tests. Test your drives using HDtune, your gpu using furmarks, cpu using prime95 26.6, and memory using memtest6.

http://www.hdtune.com/
http://www.ozone3d.net/benchmarks/fur/
http://www.mersenneforum.org/showthread.php?t=15504
http://www.memtest86.com/

 

[PeppermintFangs]

I would first suggest doing a few tests. Test your drives using HDtune, your gpu using furmarks, cpu using prime95 26.6, and memory using memtest6.

http://www.hdtune.com/
http://www.ozone3d.net/benchmarks/fur/
http://www.mersenneforum.org/showthread.php?t=15504
http://www.memtest86.com/

Unfortunately this isn't an option given the crashes are occurring before I even have the chance to install windows. Windows 7 setup crashes, so I can't do any tests.

 

[Rocky Bennett]

Can you get into your BIOS and reset your BIOS?

 

[PeppermintFangs]

Can you get into your BIOS and reset your BIOS?

Already tried - no dice!

 

[elbert]

remove one of the ram sticks and test. Then test the other. Disconnect all drives and see if you can get into bios.

 

[PeppermintFangs]

remove one of the ram sticks and test. Then test the other. Disconnect all drives and see if you can get into bios.

I can get into bios luckily, it's just booting windows that crashes the computer. I have tried one ram stick and that didn't work either.

 

[superninja12]

what pwoersupply do you have got now?

 

[elbert]

Well if the EZ debug LED's on the motherboard aren't showing any CPU, RAM, or VGA issue I guess the PSU is the only thing left.

 

[PeppermintFangs]

Well if the EZ debug LED's on the motherboard aren't showing any CPU, RAM, or VGA issue I guess the PSU is the only thing left.

Just bought a PSU that I've seen several other skylake builds use. A little painful for my wallet, as it was unplanned, but perhaps necessary. I'll update the thread with what will hopefully be my success. Thanks for your help!