Will this work

[SirSamuel]

Ok so it give me a warning with this build but won't say if it fits or if it doesn't fit soo...
Anyways take a look please(below).
----
This link below ok so first thing
*Can the case fit the Video Card and whatever the Drive bay is in it????

http://pcpartpicker.com/p/DLFJBm

 

[Karsten75]

You may have to remove a drive cage to fit the GPU. Usually not a major problem. Just a heads-up.

 

[terry4536]

The case has graphics card clearance for :

Clearance
VGA Card 305mm (w/o fan), 280mm (installed), 230mm (full pivot)
Cable Management 25mm

It is going to a tight fit to get the graphics card in without removing the hard drive cage. The card is 280mm long and your limit is 280mm.

 

[SirSamuel]

The case has graphics card clearance for :

Clearance
VGA Card 305mm (w/o fan), 280mm (installed), 230mm (full pivot)
Cable Management 25mm

It is going to a tight fit to get the graphics card in without removing the hard drive cage. The card is 280mm long and your limit is 280mm.

Ok then, umn do you recommend maybe a different case that's better/bigger than that one?

 

[terry4536]

Sure any number of cases will work. Just check the specifications for graphics card clearance. It should be greater than the length of your card 280mm or 11 inches.

The regular NZXT Phantom would work for example.