Bought brand new computer, put parts today, tried installing Win10 on it, but I am constantly getting different blue screens, both during installation and now afterwards.
I have ASUS TUF B550M E WIFI MOBO, Ryzen 5 5600, Kingston Fury 2x16GB 3600Mhz, GTX 970 and 2x1TB SSD 980 M2.
Page fault in non paged area, Driver overran stack buffer, System thread exception not handled, Driver IRQL not less or equal, error code 0xc0000098 are just some of them showing up.
Before I plugged all parts I did BIOS flash, afterwards I placed all parts together and made Win10 installation with Media Creation Tools. Windows installation started normally, I selected partition, language, all that jazz, but I got an error and it restarted it all. Then it got into various loops, either blue screen ones, or showing some error how things weren't installed properly and it needs to restart only to be shown same message again and again. After several restarts and installations, it finally managed to boot to windows. But then after few clicks it started showing blue screens again and restarting the machine.
When it comes to BIOS I turned off fast boot (or something like that) because I read it might help during installation. Other than that I just setted up date and time.
I also noticed that RAM speed is only 2400Mhz in BIOS, tried changing that to 3600Mhz, then returned back to default (2400). I read before about some XMP or something like that, related to RAM, but not really sure could that be the case?
Any idea what might be an issue here? Any help is appreciated, thanks in advance.
I have ASUS TUF B550M E WIFI MOBO, Ryzen 5 5600, Kingston Fury 2x16GB 3600Mhz, GTX 970 and 2x1TB SSD 980 M2.
Page fault in non paged area, Driver overran stack buffer, System thread exception not handled, Driver IRQL not less or equal, error code 0xc0000098 are just some of them showing up.
Before I plugged all parts I did BIOS flash, afterwards I placed all parts together and made Win10 installation with Media Creation Tools. Windows installation started normally, I selected partition, language, all that jazz, but I got an error and it restarted it all. Then it got into various loops, either blue screen ones, or showing some error how things weren't installed properly and it needs to restart only to be shown same message again and again. After several restarts and installations, it finally managed to boot to windows. But then after few clicks it started showing blue screens again and restarting the machine.
When it comes to BIOS I turned off fast boot (or something like that) because I read it might help during installation. Other than that I just setted up date and time.
I also noticed that RAM speed is only 2400Mhz in BIOS, tried changing that to 3600Mhz, then returned back to default (2400). I read before about some XMP or something like that, related to RAM, but not really sure could that be the case?
Any idea what might be an issue here? Any help is appreciated, thanks in advance.