Windows 10 BSOD Issue

acer2dn

Prominent
Mar 8, 2018
122
0
690
2
I got a update from AMD Drivers yesterday but when i went on my computer today i started getting BSOD issues and I found out about this from the Windows Event Viewer.


Processor: AMD FX4300 4 Core 3.80 GHz
Graphics Card AMD Radeon R7 240
RAM: (2 x 4 8GB)
Hard Drive Capacity 1 TB

Log for BSOD:

http://textuploader.com/dxzqh
 
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
error code = (0xffffffffc0000005) = 0xc0000005
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.
memory address was 0xfffff8039c747310 (could be a valid kernel address but could have bit corruptions, kernel addresses start with 0xfff)

since you got error code 0xc0000005 you should boot and run memtest86 on its own boot image. This will confirm your memory timings.


otherwise you should put your actual memory dump on to a cloud server, share the file for public access and post a link.
 
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
error code = (0xffffffffc0000005) = 0xc0000005
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.
memory address was 0xfffff8039c747310 (could be a valid kernel address but could have bit corruptions, kernel addresses start with 0xfff)

since you got error code 0xc0000005 you should boot and run memtest86 on its own boot image. This will confirm your memory timings.


otherwise you should put your actual memory dump on to a cloud server, share the file for public access and post a link.
 

ASK THE COMMUNITY

TRENDING THREADS