Windows 10 install loop

[swiift]

When installing windows 10 pro onto my os-less pc, I insert my installation media, and go through all the necessary steps until it says that I have to restart to continue. When it restarts, it goes back to the beginning of the installation process (language selection. Any/all help is appreciated. Thank you in advance.

 

[daswilhelm]

Make sure the first boot device in the BIOS is the hard disk you are installing windows on.

 

[smorizio]

when you reboot you have to pull the usb stick.

 

[Rocky Bennett]

When you re-boot you have to remove your installation media, probably a USB stick as smorizio has pointed out.

 

[thejakerussell34]

When you re-boot you have to remove your installation media, probably a USB stick as smorizio has pointed out.

When I pull my usb out during the re-boot it says "reboot and select proper boot device" help

 

[smorizio]

depending on your bios. when it says reboot go into the bios and change the boot order from usb to hard drive/ssd. if the windows files were put on right the drive will post. if not use an 8g usb stick and windows media creation tool. on your ssd and hard drives make sure there set to achi and not raid.