Windows 10 - Not showing image after Sleep mode

[XGamer_BiH]

Hello everyone,

My problem is that after I turn on my PC after Sleep mode, it simply won't show the picture. So, this happens after my new GPU. Since I have got it, I changed my monitor and PSU. My monitor is connected via DVI. After I press the power button after "sleeping", my monitor stays inactive (off), and just when I press the reset button, the monitor goes on and the all works fine. Any fixes?

 

[viveknayyar007]

Hello XGamer_BiH

I was wondering if you already tried resetting the power plan settings back to default? If not, doing so might help.

Also, you can try switching to a different power plan and see if the issue is resolved.

Feel free to report back if further assistance is needed.

Cheers!!

 

[XGamer_BiH]

Hello XGamer_BiH

I was wondering if you already tried resetting the power plan settings back to default? If not, doing so might help.

Also, you can try switching to a different power plan and see if the issue is resolved.

Feel free to report back if further assistance is needed.

Cheers!!

I'm sorry to say that, that didn't work :/

 

[johnbl]

I can think of 5 or 6 causes of this but I have.very limited time this morning so try this: go into bios and
Make any change and change it back and save.the changes. Then boot into Windows. You could also look for a setting in Bios that says something like repost Vga after s3 (sleep mode 3)and make sure it is turned on.

You can try to isolate the problem:
1.When the screen is blank, turn the monitor off and back on. If it works it could be a setting in firmware of the monitor.
2. Unplug the video cable from the monitor and plug it back in.

Wife is outstanding behind me, got to go. Sorry

 

[XGamer_BiH]

I can think of 5 or 6 causes of this but I have.very limited time this morning so try this: go into bios and
Make any change and change it back and save.the changes. Then boot into Windows. You could also look for a setting in Bios that says something like repost Vga after s3 (sleep mode 3)and make sure it is turned on.

You can try to isolate the problem:
1.When the screen is blank, turn the monitor off and back on. If it works it could be a setting in firmware of the monitor.
2. Unplug the video cable from the monitor and plug it back in.

Wife is outstanding behind me, got to go. Sorry

Ok I'll try that, greet ur wife