Windows 10 won't install, I am not able to get past the BIOS

[jamspls]

I did everything correctly until the very final step.
I inserted my Windows 10 USB stick, set up Windows 10 as usual. I chose my language, 64 bit etc.
Then, a screen appeared and told me all I had to do now in order to continue was to remove the Windows 10 thumb drive, press the restart button and then the installation would occur automatically.

I did that, but I was just redirected to the BIOS. I turned my PC off and put the Windows 10 drive back in, but it didn't work. Now, I can't do anything except enter the BIOS.

This is a newly built PC and as far as I can tell, everything is installed properly.

My specs are:
i7 6700
R9 Fury
MSI PC Mate H170A
2x4 DDR4 2133 Kingston Hyperx Fury Ram
EVGA 600w PSU
WD Black 1 TB HD

 

[airplanegeek]

In your BIOS, make sure the boot order is set to boot from your hard drive first.

 

[jamspls]

In your BIOS, make sure the boot order is set to boot from your hard drive first.

Thank you for your help!

Of all the things the problem could have been, the only issue was that I forgot to plug in 1 of the 2 cords for my hardrive. My newbie levels are high.
Thanks again anyway!