I have been trying to install Windows 7 on a Dell Poweredge 2850 (Data sheet: http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf), however when I get to the step when I am supposed to choose where to install Windows 7, no hard drives show up (I have: http://www.amazon.com/gp/product/B000H3HW9C/ref=oh_details_o03_s00_i00 in the slot labeled "0"). According to my research, I need a particular driver so that the Windows 7 setup can 'see' the hard drive, however I do not know which driver I need. As far as I can tell it should be one of the drivers from http://www.dell.com/support/drivers/us/en/555/Product/poweredge-2850 , however there are many there, and I am not sure which one specifically I need (I only have one SCSI drive, however it seems to me that the computer is set up to treat the hard drives in RAID configuration, and I think that means that (at least by default) the computer is acting like it is setup for RAID 0).
So, my question is, which driver do I need (link please), and what do I have to do to use it so that Windows setup can 'see' the hard drive?
If it matters, I am installing Windows 7 from an 8gb flash drive, and I have a second 1gb flash drive ready for the necessary driver. Also, the server itself has 6gb of DDR2 ram, and 2 3.2ghz zeon processors.
So, my question is, which driver do I need (link please), and what do I have to do to use it so that Windows setup can 'see' the hard drive?
If it matters, I am installing Windows 7 from an 8gb flash drive, and I have a second 1gb flash drive ready for the necessary driver. Also, the server itself has 6gb of DDR2 ram, and 2 3.2ghz zeon processors.