Windows 7 epson slip printer

[sushil545]

Hello,

I have a EPSON TM-H6000II printer installed on Windows 7 and respective drivers for Slip and Receipt are configured.

When I use, RECEIPT as default printer it works as expected. The problem is whenever I use SLIP as default printer, it print on RECEIPT printer.

Irrespective of default printer setting, the RECEIPT printer prints the output.

Any help would be highly appreciate.

thanks in advance
-sushil

 

[Brett928S2]

Hi

Epson support....

All the best Brett

 

[J_E_D_70]

Did you read

https://c528a1c3-a-82a64781-s-sites.googlegroups.com/a/pcamerica.com/support/file-lockers/pdf-locker/Epson_TM-H6000_Printer_7.pdf?attachauth=ANoY7cq5lAQfsGssGDCQaoSyadFq3Ylq2n1hBL60lyiA2ZhEAFHBkQyyVWjs8j_hGgoj2zxlr7qaXz8YPHTm-s1ZlddcursTlU5J0OZRMHro_bLJgTY6BgBJ9NbLjTDweSEun6C0Cp7xmwHd9YNSWn664fmFN8EZcKYmaAeFYQo_ipgiG8gO7FB-6yx0Jaz20rUPqByOknauy4bNU_butJwTHjAak2wt5MZ8cM2mWVBQ0mB8XoVFTVnqKNpeyh-_HWgI_kJOzTxq&attredirects=0

 

[sushil545]

Followed the link but there is no luck.

I have downloaded the latest printer driver APD_EMW435, released by EPSON 07/24/12. This also did not help.

I did further analysis and observed that Escape sequence codes printing is the one which is always printing in the receipt printer.

Anybody gone throuth with the similar experience in the past?

-Sushil

 

[sushil545]

It's appears to be driver issue.

Escape sequence codes always prints in receipt printer. Thinking of writing a web user control to do the job.