windows has stopped this device code 43 USB (Dont know which one)

[nitinvaid20]

I have this error i have tried removing the USB ports from my motherboard too still same it sometomes comes sometimes not tried uninstalling it too
which port is it?
I am using Asus Maximus VII Ranger Motherboard

 

[greatoz]

I have this error i have tried removing the USB ports from my motherboard too still same it sometomes comes sometimes not tried uninstalling it too
which port is it?
I am using Asus Maximus VII Ranger Motherboard

A simple solution that should not cause problems would be to re-install your chipset drivers. Because it's showing under USB controllers, it's not likely it's a USB device that's malfunctioning - it's one of the USB controllers on the motherboard itself. Check the Asus web page for the chipset driver package for your MB, or you can get one from Intel directly.

 

[nitinvaid20]

I have this error i have tried removing the USB ports from my motherboard too still same it sometomes comes sometimes not tried uninstalling it too
which port is it?
I am using Asus Maximus VII Ranger Motherboard

A simple solution that should not cause problems would be to re-install your chipset drivers. Because it's showing under USB controllers, it's not likely it's a USB device that's malfunctioning - it's one of the USB controllers on the motherboard itself. Check the Asus web page for the chipset driver package for your MB, or you can get one from Intel directly.

Well I tried that too
still not helping is the motherboard USB controller has issues? should i RMA the board because its still under 4Months Warranty Left

 

[greatoz]

I take you've tried unplugging all of your USB devices one at a time to see if it clears? That would be the next step. If reinstalling the chipset drivers doesn't clear it, and removing all attached USB devices doesn't clear it - then yes I would think that one of the onboard USB controllers has a fault. If that's the case then you may have to RMA the board.

 

[nitinvaid20]

I take you've tried unplugging all of your USB devices one at a time to see if it clears? That would be the next step. If reinstalling the chipset drivers doesn't clear it, and removing all attached USB devices doesn't clear it - then yes I would think that one of the onboard USB controllers has a fault. If that's the case then you may have to RMA the board.

Yes i removed all the USB ports from Back also and one thing that i noticed that. The Backside USB3.0 Ports are not working when i plugged my Keyboard onto it....
Sad i have to RMA it now i have to drive like 40Km away from my place to the service center and then have to wait dont know how many days for the replacement Board

 

[nitinvaid20]

I am confused between Keep it like this or RMA it🙁

 

[greatoz]

I suppose it's up to you. If you can use the MB with some of the USB ports not working - keep it. It you need the USB ports now (or in the future) you should RMA it.

 

[nitinvaid20]

I suppose it's up to you. If you can use the MB with some of the USB ports not working - keep it. It you need the USB ports now (or in the future) you should RMA it.

Sent the motherboard to the service center lets see what happens

 

[nitinvaid20]

Well they are saying there is minor CPU socket pin is bent.... And now they are waiting for the approval that can it be fixed in warranty of not..I hate this....