[SOLVED] Windows installation restart loop

[Luminusx4]

My english is not that good so sorry...
Ok, i bought a ssd and i wanted to install windows 10 on it, i had some problems and stuff but i fixed them.
Now i stuck in a part when windows need to restart to continue the installation, then i pull out the USB with the windows.
And then i get back to Bios, and if i try to boot the SSD nothing happens...
What can i do?
Thanks anyway

 

[RARRAF]

there is no need to pull out the USB it is only half way through the installation leave it in there till fully installed.

 

[Luminusx4]

there is no need to pull out the USB it is only half way through the installation leave it in there till fully installed.

If im not pulling it out, it comes back to the start of thr installation

 

[RARRAF]

well all I can suggest is make sure your bios settings are correct and no problems then try making another USB install of windows 10 I know I had issues myself.

 

[Luminusx4]

well all I can suggest is make sure your bios settings are correct and no problems then try making another USB install of windows 10 I know I had issues myself.

Im pretty sure thats something wrong in my bios settings...
But i dont know what, and ive tried too many times to change some thing there

 

[RARRAF]

well there should not be too much to look at but the memory timings should be set too what you have.