Wireless card wont Install

[parker]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Hello All,

I just purchased a linksys wireless lan card for an older PC with a fresh XP
pro install on it with SP2. When I boot up the hardware wizard does not
automatically find the card. It also will not load when trying a manual
install(came with needed software). The system tells me the information
required is not on the CD. I went to linksys site and downloaded the driver
software and tried again to no avail. The system is an older gateway from
1998 with a 400mhz processor and 128RAM. The OS runs just fine and other
programs I loaded work very well but what am I missing when trying to
install this wireless card? Do I need to flash the BIOS? I'm at a loss.

Thanks In Advance

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Hello

Could be that laptop is not compatible and maybe you better
off using a patch cable. I mean flashing the bios may and may
not be the answer but I think it's more of a combatibility issue.
Just use the cable, could just be an issue with the card and your
laptop

Alvin


Parker wrote:

> Hello All,
>
> I just purchased a linksys wireless lan card for an older PC with a fresh XP
> pro install on it with SP2. When I boot up the hardware wizard does not
> automatically find the card. It also will not load when trying a manual
> install(came with needed software). The system tells me the information
> required is not on the CD. I went to linksys site and downloaded the driver
> software and tried again to no avail. The system is an older gateway from
> 1998 with a 400mhz processor and 128RAM. The OS runs just fine and other
> programs I loaded work very well but what am I missing when trying to
> install this wireless card? Do I need to flash the BIOS? I'm at a loss.
>
> Thanks In Advance

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

"Parker" <nospam@nospam.com> wrote in message
news:eyPNBfUtEHA.4040@TK2MSFTNGP09.phx.gbl...
> Hello All,
>
> I just purchased a linksys wireless lan card for an older PC with a
> fresh XP pro install on it with SP2. When I boot up the hardware
> wizard does not automatically find the card. It also will not load
> when trying a manual install(came with needed software). The system
> tells me the information required is not on the CD. I went to linksys
> site and downloaded the driver software and tried again to no avail.
> The system is an older gateway from 1998 with a 400mhz processor and
> 128RAM. The OS runs just fine and other programs I loaded work very
> well but what am I missing when trying to install this wireless card?
> Do I need to flash the BIOS? I'm at a loss.
>
> Thanks In Advance
>

Are you certain that XP SP2 has the needed driver? If you inserted the
card and the correct driver was not available in the OS, it is likely
that the card has been enumerated as another device. With the card
inserted, open device manager, view hidden devices, and look for any
warnings (yellow) or error (red) or any device labeled "linksys".
Remove any you find. Remove the card and reboot. Install the correct
driver from the CD, then insert the card the first time.

Q

 

[parker]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Thank You for your responses. I will give it another go


"Quaoar" <quaoar@tenthplanet.net> wrote in message
news:O3pQHfWtEHA.3884@TK2MSFTNGP11.phx.gbl...
>
> "Parker" <nospam@nospam.com> wrote in message
> news:eyPNBfUtEHA.4040@TK2MSFTNGP09.phx.gbl...
>> Hello All,
>>
>> I just purchased a linksys wireless lan card for an older PC with a fresh
>> XP pro install on it with SP2. When I boot up the hardware wizard does
>> not automatically find the card. It also will not load when trying a
>> manual install(came with needed software). The system tells me the
>> information required is not on the CD. I went to linksys site and
>> downloaded the driver software and tried again to no avail. The system is
>> an older gateway from 1998 with a 400mhz processor and 128RAM. The OS
>> runs just fine and other programs I loaded work very well but what am I
>> missing when trying to install this wireless card? Do I need to flash the
>> BIOS? I'm at a loss.
>>
>> Thanks In Advance
>>
>
> Are you certain that XP SP2 has the needed driver? If you inserted the
> card and the correct driver was not available in the OS, it is likely that
> the card has been enumerated as another device. With the card inserted,
> open device manager, view hidden devices, and look for any warnings
> (yellow) or error (red) or any device labeled "linksys". Remove any you
> find. Remove the card and reboot. Install the correct driver from the
> CD, then insert the card the first time.
>
> Q
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Make sure you install the drivers and reboot/shutdown, *before* you
insert the card. After XP comes up completely, the hardware wizard will
understand what it is looking for.

courtney sends....


Parker wrote:
> Thank You for your responses. I will give it another go
>
>
> "Quaoar" <quaoar@tenthplanet.net> wrote in message
> news:O3pQHfWtEHA.3884@TK2MSFTNGP11.phx.gbl...
>
>>"Parker" <nospam@nospam.com> wrote in message
>>news:eyPNBfUtEHA.4040@TK2MSFTNGP09.phx.gbl...
>>
>>>Hello All,
>>>
>>>I just purchased a linksys wireless lan card for an older PC with a fresh
>>>XP pro install on it with SP2. When I boot up the hardware wizard does
>>>not automatically find the card. It also will not load when trying a
>>>manual install(came with needed software). The system tells me the
>>>information required is not on the CD. I went to linksys site and
>>>downloaded the driver software and tried again to no avail. The system is
>>>an older gateway from 1998 with a 400mhz processor and 128RAM. The OS
>>>runs just fine and other programs I loaded work very well but what am I
>>>missing when trying to install this wireless card? Do I need to flash the
>>>BIOS? I'm at a loss.
>>>
>>>Thanks In Advance
>>>
>>
>>Are you certain that XP SP2 has the needed driver? If you inserted the
>>card and the correct driver was not available in the OS, it is likely that
>>the card has been enumerated as another device. With the card inserted,
>>open device manager, view hidden devices, and look for any warnings
>>(yellow) or error (red) or any device labeled "linksys". Remove any you
>>find. Remove the card and reboot. Install the correct driver from the
>>CD, then insert the card the first time.
>>
>>Q
>>
>
>
>