Wireless clients on LAN

[s116262]

Hi all! Should be simple:

LAN: 192.168.5.1/100 has the gateway to the internet

WLAN: 192.168.1.1/100 has wireless clients.

How can I get the wireless clients to participate on the LAN? Do I set up NAT?

The WLAN is being done with a DLINK wireless router. The WAN port is plugged into the LAN, and it assigns the WLAN clients the 1.1.1/100 IP's. It won't let me change the WLAN client IP pool to the 5.1/100.

Is this a simple fix I am not seeing? Thanks for any help!

 

[Emerald]

what does the /100 mean?

configure your D-Link as a AP.

disconnect your dlink
log into the dlink
set the LAN IP to 192.168.5.253
disable DHCP
save settings
connect one of the four LAN ports to your main router. NOT the WAN port.
reboot the dlink

 

[s116262]

what does the /100 mean?

configure your D-Link as a AP.

disconnect your dlink
log into the dlink
set the LAN IP to 192.168.5.253
disable DHCP
save settings
connect one of the four LAN ports to your main router. NOT the WAN port.
reboot the dlink

the /100 just meaning the range of IP's, I guess my syntax is off... 1-100 maybe?

Great! Sounds like a simple enough solution. I will try it out. THANKS!!!