Wires touching GPU, Issue?

[ACR102]

So I installed my GPU and noticed that some of the wires like the one for the power switch might touch the bronze heatsink of the r9. Would this turn into a problem if I were to run my gpu? If so how would I go about solving this? Thanks for your time.
Motherboard: ASRock H97M Anniversary LGA 1150
GPU: Power color radeon r9 290x turboduo

 

[digitaldoc]

I prefer to not have any wires touching the heatsink. While it is unlikely that the wires will get damaged, it can interfere with the airflow, and in turn, the cooling.

The wires should be kept out of the way towards the periphery of the case. This can be done with zip ties. The link below shows you how to do a better wiring job.

http://www.maximumpc.com/article/howtos/howto_give_your_pc_professional_wiring_job?page=0,0

 

[Rocking Durgesh]

You have to worry because it is touching heatsink. They sometimes go really hot and van burn the wire because that power switch wire has thin insulator. You should tie that wire somewhere such that it does not touch the heatsink. ...