[SOLVED] Wobbly Text

[Bobbyboy123789]

Whenever I use my printer it prints with the text all up and down, I have gone thru the suggestions in the manual but still will not print as it should, any suggestions please

 

[Ralston18]

Make and model printer?

Age, condition?

Have you downloaded, reinstalled, and reconfigured the drivers via the printer manufacturer's website?

Any indicator lights or LEDs?

Is the printing correct via any built-in test pages?

Are you using the proper inks/toner?

Paper?

All apps or just some apps?

 

[Bobbyboy123789]

Make and model printer? Canon MG3650

Age, condition? In good condition 4 years old

Have you downloaded, reinstalled, and reconfigured the drivers via the printer manufacturer's website? Yes updated driver yesterday

Any indicator lights or LEDs? No

Is the printing correct via any built-in test pages? Printer Test page OK, Test page for nozzles shows a couple are blocked have cleaned and deep cleaned but no change,.

Are you using the proper inks/toner? Yes

Paper? Yes

All apps or just some apps? All

 

[Ralston18]

Were you able to run the test page? Was the text misaligned?

Do you have the User Manual?

If not, I found the following link:

http://gdlp01.c-wss.com/gds/2/0300019362/02/MG3600ser_OnlineManual_Win_EN_V02.pdf

Verify that I found the correct manual.

Go to the Maintenance sections beginning on physically numbered Pages 140 and 149.

Work through the print head alignment instructions.

 

[hang-the-9]

You can get a new one of those for $40, for that cost having it work for 4 years is pretty good. I'd just replace it with a new one. Running deep clean on the ink will cost you more in ink than a new printer LOL