[SOLVED] Won't Boot After Changing Msconfig Memory Settings

Dec 22, 2019
3
0
10
My computer seemed sort of sluggish so I searched for a solution online. I found a suggestion to use msconfig advanced settings and change memory to max.

After restarting my computer keeps dumping memory. It now only has repair and normal after crashing the first time, no safe mode. Repair can't find anything and it says there is no restore point or image to recover.
 
Solution
first try <F8> during reboot.
try to boot to last known good config.

if that doesn't work:

Try a Windows 7 Repair Install, it sounds a bit scary but you're reinstalling Windows while keeping your data and changes.
if you have your original install CD (or can get a hold of a similar copy)

It looks like you're doing a clean install but remember to select Upgrade when the time comes... you're essentially upgrading your system with your originally O/S

https://www.pcgamer.com/how-to-repair-a-faulty-windows-installation-without-reformatting/
Windows 7

Just to add some more details. It crashes after the Windows Logo to a blue screen.

"A problem has been detected and windows is shutting down to prevent damage to your computer

BAD_SYSTEM_CONFIG_INFO

If this is your first time....Follow these steps:

Check to make sure any new hardware or software is properly installed.

If problems continue, disable or remove....

Stop: 0x00000074 (0x000000000000002, 0xFFFFF880037ED9ED,0x00000000000002, 0xFFFFFFFC000009A)

Collecting data for crash dump...
Initializing disk for crash dump...
Beginning dump of physical memory.
Dumping physical memory to disk:
 
Last edited:
first try <F8> during reboot.
try to boot to last known good config.

if that doesn't work:

Try a Windows 7 Repair Install, it sounds a bit scary but you're reinstalling Windows while keeping your data and changes.
if you have your original install CD (or can get a hold of a similar copy)

It looks like you're doing a clean install but remember to select Upgrade when the time comes... you're essentially upgrading your system with your originally O/S

https://www.pcgamer.com/how-to-repair-a-faulty-windows-installation-without-reformatting/
 
  • Like
Reactions: Damedius
Solution
first try <F8> during reboot.
try to boot to last known good config.

if that doesn't work:

Try a Windows 7 Repair Install, it sounds a bit scary but you're reinstalling Windows while keeping your data and changes.
if you have your original install CD (or can get a hold of a similar copy)

It looks like you're doing a clean install but remember to select Upgrade when the time comes... you're essentially upgrading your system with your originally O/S

https://www.pcgamer.com/how-to-repair-a-faulty-windows-installation-without-reformatting/
Thanks. Giving it a try. I'll let you know how it goes.