Question Wont boot with 3200MHz

[peanyy]

Ok, So I Recently upgraded to the Ryzen 5 3600 so got some HyperX Fury RAM at 3200MHz. Upon adjusting the profile in the bios to the 3200MHz the PC no longer boots until I reset the bios again?

I also want to note the motherboard is a ASUS TUF B450 Pro

Thanks

 

[scoutsam22]

Hey man,
I hate to say it because you paid for the 3200mhz ram but just turn on XMP and let it do it's thing

 

[peanyy]

Hey man,
I hate to say it because you paid for the 3200mhz ram but just turn on XMP and let it do it's thing

It runs on 3000MHz i guess I just gotta stick with that ?

 

[migs24]

i have the same problem

i just let it set to 3000mhz also.

 

[TheJoker2020]

It runs on 3000MHz i guess I just gotta stick with that ?

Have you checked the manual and that you are using the correct RAM slots.?

Have you reset the BIOS to defaults and then enabled the XMP profile without changing anything else.?

Have you checked to see if there are BIOS BIOS/UEFI updates available.?

Try these in this order.

Good luck.