Worker Thread #1 Stoped in Prime 95

[ragsters]

I ran prime 95 for about 10 min to see what my load temps were when I noticed that worker thread #1 stopped after test three while worker thread #2 went all the way to test #8. When I stopped the test it said that there were no errors. I also have round off checking on. Did the test fail? What happened? I thought for sure my system was stable.

I have a asus e8400 OC to 3.6 Ghz.

 

[AKM880]

Were you watching the CPU temps while running Prime95?

 

[ragsters]

Yes I was.

Edit: The temperatures were about the same on both cores. No more than 55 degrees.

 

[jsc]

What is your CPU VID, and what was the core voltage that you were running?

 

[ragsters]

My VID is 1.3 and I am running the core voltage at 1.232(cpuz load) but set on 1.3v in Bios.

Edit: 1.275 in Bios

 

[ragsters]

I have been running it for 3 hours now and everything seems ok for the moment.

 

[orangegator]

If it fails, then it's not stable. It could be your cpu or ram.

 

[ragsters]

If it fails, then it's not stable. It could be your cpu or ram.

Well, how do I know it failed if there was no errors?

 

[ragsters]

Using Prime 95 Version 25.11 I ran it for 4 hours with no errors and with a maximum temp of 58 on both cores. Last time when I ran it I was using prime 95 version 24.94 or something like that.