Hi,
I've used PCPartPicker to check the compatibility of a build. It gave me 2 Compatibility notes which are:
1) The motherboard M.2 slot #2 shares bandwidth with a SATA 6.0 Gb/s port. When the M.2 slot is populated, one SATA 6.0 Gb/s port is disabled.
2) Some physical dimension restrictions cannot (yet) be automatically checked, such as cpu cooler / RAM clearance with modules using tall heat spreaders.
I'm wondering if I can ignore these compatibility notes for the build. Ultimately, I'd like to know whether I would run into any issues with this build (see below). Any recommendations would be appreciated.
I've used PCPartPicker to check the compatibility of a build. It gave me 2 Compatibility notes which are:
1) The motherboard M.2 slot #2 shares bandwidth with a SATA 6.0 Gb/s port. When the M.2 slot is populated, one SATA 6.0 Gb/s port is disabled.
2) Some physical dimension restrictions cannot (yet) be automatically checked, such as cpu cooler / RAM clearance with modules using tall heat spreaders.
I'm wondering if I can ignore these compatibility notes for the build. Ultimately, I'd like to know whether I would run into any issues with this build (see below). Any recommendations would be appreciated.