Would this psu fit in my system?

[Whatisgoingonherethen]

So here is the psu:
http://www.amazon.co.uk/Antec-HCG-620-13-5cm-Current-Bronze/dp/B004AGTZXI/ref=lh_ni_t?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE#productDetails
it says it is 13.5 cm high, which i think is larger than my case can take, but i'm not sure.
The case I will be getting is the phantom 410 mid tower. Any help?

 

[InvalidError]

The width and height of PSUs are standard. The depth can vary somewhat but usually is not a problem.

A standard ATX PSU can be up to 150mm deep so unless your case is non-standard, a 135mm deep PSU should fit easily.

 

[Whatisgoingonherethen]

The width and height of PSUs are standard. The depth can vary somewhat but usually is not a problem.

A standard ATX PSU can be up to 150mm deep so unless your case is non-standard, a 135mm deep PSU should fit easily.

ta