X99A Sli Plus No post/display

[Benovation]

I just finished building my rig,
However when I plugged it in to my monitor and turned it on. Everything lit up, fans spinning, blue led on the board, as well as green lights for the power and reset buttons on the northerboard. But no display on the monitor, just the power button blinking.

I had a similar issue which turned out to be a dead mobo, except the monitor was saying no signal on the screen. I have no clue what to do, and to be frank. I'm (edited profanity out) pissed.

Please help guys. Really struggling here. I've reseated all the ram, tried every stick in DIMM 1, took all of it out (no ram beep), then put it all back in, put the SSD and HDD satas in different places. Nothing is working. What should I do.

MSI X99A Sli Plus mobo
I7-5820k
NZXT X61 Kraken
EVGA 1080 FTW
Corsair Vengeance LPX Ram
850w EVGA B2 power supply

 

[ryguybuddy]

Did you plug the cable you are using into the GPU? That might be your problem if you plugged it into your mobo.

 

[Tradesman1]

Might want to bench it:

http://www.tomshardware.com/faq/id-1753671/bench-troubleshooting.html

 

[Benovation]

No, it's in the GPU. ((Sorry for down voting your post, my fault. Was trying to figure out how to reply, and thought the arrow might expand something, or I could at least undo it. Sorry!)

 

[ray_tracer]

Which DIMM slots have you got your RAM in? Is it a Dual Channel kit or Quad Channel? I've read in several places that with this particular mobo depending on your RAM the manual does not tell you the correct slots to use. See this review: https://www.overclockers.co.uk/msi-x99a-sli-plus-intel-x99-socket-2011-ddr4-atx-motherboard-mb-301-ms.html#comments