Xeon 800 Mhz Bus

[Guest]

Archived from groups: alt.comp.hardware.overclocking (More info?)

Looking for an Overclock~able board in one.
Going to keep surfing the net to try to find one, not
sure how far I'll get though.
I just hope I can still use my 533 MHz bus CPU's till I
decide when I want to upgrade.
ty in advanced..

Denny. ;-) 🙂

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking (More info?)

"Dennis E Strausser Jr" <dstrausser33@comcast.net> wrote in message
news:41edda8c$1_2@alt.athenanews.com...
> Looking for an Overclock~able board in one.
> Going to keep surfing the net to try to find one, not
> sure how far I'll get though.
> I just hope I can still use my 533 MHz bus CPU's till I
> decide when I want to upgrade.
> ty in advanced..
>
> Denny. ;-) 🙂
>
>
>
I found one.
But Iwill won't be making them for a while .
End of February is what they told me.
Takes both 533 and 800 Bus.
Does about everything that a normal good desktop board does
for Overclocking.
Lock AGP/PCI
Turn up FSB/ "Can be changed further then the one I have."
Vcore can be changed.
For the most part, an overclockers dream for a server board.
Denny. ;-) 🙂

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking (More info?)

"Dennis E Strausser Jr" <dstrausser33@comcast.net> wrote
> Looking for an Overclock~able board in one.
> Going to keep surfing the net to try to find one, not
> sure how far I'll get though.
> I just hope I can still use my 533 MHz bus CPU's till I
> decide when I want to upgrade.
> ty in advanced..
>
> Denny. ;-) 🙂

Asus NCCH-DL is also an overclocker's board - here's a loooooong thread at
2cpu.com on the ncch-dl;
http://forums.2cpu.com/showthread.php?s=092b9f9f29e3de72bc2baa9420af8827&threadid=52272&perpage=30&pagenumber=1

Nobody posting in that thread seems to have been able to push a pair of
Nocona Xeons very high as yet but there's definitely potential there with
the ncch-dl's twin VRMs - Nocona's are power hungry beasts. In the GamePC
review of this board, they said the PCI bus & AGP port aren't locked, but
AFAICT they are - Canterwood is now well and truly mature tech'...

I am in process of building two watercooled machines for my CP-boinc farm, &
for my own general use, based on the NCCH-DL using 3.0GHz D0 stepping
Noconas - I had to send one Xeon back to OC_UK 'cause it threw errors when
run at 100%, at spec speed, or even when underclocked to 2.8GHz, but the
motherboards are both good AFAICT...

Ciao...

[UK]_Nick...
--
Nick M V Salmon Master Mariner MN(Retd.)
Email: My four initials at dsl dot pipex dot com
http://www.nmvs.dsl.pipex.com/index.htm

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking (More info?)

"Nick M V Salmon" <spam@dump> wrote in message
news:41f16a0f$0$5267$cc9e4d1f@news.dial.pipex.com...
> "Dennis E Strausser Jr" <dstrausser33@comcast.net> wrote
> > Looking for an Overclock~able board in one.
> > Going to keep surfing the net to try to find one, not
> > sure how far I'll get though.
> > I just hope I can still use my 533 MHz bus CPU's till I
> > decide when I want to upgrade.
> > ty in advanced..
> >
> > Denny. ;-) 🙂
>
> Asus NCCH-DL is also an overclocker's board - here's a loooooong thread at
> 2cpu.com on the ncch-dl;
>
http://forums.2cpu.com/showthread.php?s=092b9f9f29e3de72bc2baa9420af8827&thr
eadid=52272&perpage=30&pagenumber=1
>
> Nobody posting in that thread seems to have been able to push a pair of
> Nocona Xeons very high as yet but there's definitely potential there with
> the ncch-dl's twin VRMs - Nocona's are power hungry beasts. In the GamePC
> review of this board, they said the PCI bus & AGP port aren't locked, but
> AFAICT they are - Canterwood is now well and truly mature tech'...
>
> I am in process of building two watercooled machines for my CP-boinc farm,
&
> for my own general use, based on the NCCH-DL using 3.0GHz D0 stepping
> Noconas - I had to send one Xeon back to OC_UK 'cause it threw errors when
> run at 100%, at spec speed, or even when underclocked to 2.8GHz, but the
> motherboards are both good AFAICT...
>
> Ciao...
>
> [UK]_Nick...
> --
> Nick M V Salmon Master Mariner MN(Retd.)
> Email: My four initials at dsl dot pipex dot com
> http://www.nmvs.dsl.pipex.com/index.htm
>
>
It would seem though that the Iwill DH800 is still the only one you can turn
up vcore of the cpu
I think anyway.
http://forums.2cpu.com/showthread.php?s=&threadid=50793




http://www.custompc.co.uk/custompc/reviews/58217/iwill-dh800.html
I love this line..
"Anyone can buy a Xeon motherboard and run it at stock speeds,
but few dare (or are daft enough) to overclock
such an expensive combination"
Yeah, lol, I'm one of them.
Asus PC-DL Deluxe.
2xCPU's = 2.66 GHz Running @ 3.2 GHz
Mixed Ram.
PC2100 and PC2700 1GB in all.
All four of my DIMMS are full.
That's running @ PC3200 Speeds.

Anyways, ty for the links.

Denny. ;-) 🙂