Question XMP PROBLEM

[MaorS1212]

Hi , this is my setup

i9 13900k , auros master elite ax 1.0 . corsair CMK32GX5M2B6400C36 . 4080 auros master . 1000W POWER

I have a problem with XMP I updated the bios and all the drivers

My RAM is 4800 MHz

My RAM memories are connected to A2 and B2

When I enter the bios and put XMP 1 and try to go up to 6400 MHz (maximum), the computer resets and crashes I also tried to go up manually to 5600 / 5400 and I didn't succeed either

I did all the tests including MEMSTEST86 Everything is fine with hardware and connections

Do you have an idea why the computer crashes?

 

[Roland Of Gilead]

I have a problem with XMP I updated the bios and all the drivers

When you updated the bios, did you clear CMOS? if not, then you should try that.

 

[Misgar]

I couldn't find your RAM in the mobo QVL (not that's stopped me from buying RAM) so you might just be unlucky.

Have you tried 5,000 or 5,200MHz?

Alternatively, try a faster XMP setting, then relax the Primary timings manually and save before rebooting.

Memory tuning is a bit of a black art, but there are plenty of guides.

 

[Zerk2012]

Hi , this is my setup

i9 13900k , auros master elite ax 1.0 . corsair CMK32GX5M2B6400C36 . 4080 auros master . 1000W POWER

I have a problem with XMP I updated the bios and all the drivers

My RAM is 4800 MHz

My RAM memories are connected to A2 and B2

When I enter the bios and put XMP 1 and try to go up to 6400 MHz (maximum), the computer resets and crashes I also tried to go up manually to 5600 / 5400 and I didn't succeed either

I did all the tests including MEMSTEST86 Everything is fine with hardware and connections

Do you have an idea why the computer crashes?

Set XMP then manually change the memory speed to 6000 if that fails do the same thing but set the memory speed to 5600

 

[lolvatveo]

can you try overclock cpu ring ratio (i/o controller). maybe your cpu can't handle the ram speed like this