Hey guys,so i have an i7 3770K and i have 4 moduls of kingston hyperx ram:khx2000c9ad3t1k2/4gx (2 2+2 Gb kit).They are 1.65V RAMs and as i heard that is bad for Ivy Bridge,so currenly they are running on 1333MHz at 1.5V.Now obviously that is a little low,and am not an expert at this so i'm not sure i could set the timing right manually,I have 2 XMP profiles:
• XMP Profile #1: D3-2000 CL9-11-9-27 @1.65V
• XMP Profile #2: D3-1866 CL9-11-9-27 @1.65V
What if I set my XMP Profile 2,and i manually set the DRAM voltage to 1.575V(That is the maximum 3770K can handle safely if i'm right).Now will this overwrite the 1.65V what was set in the XMP profile,but nothing else so it will run on 1866 Mhz with that timing or will the XMP profil overwrite this and my RAMS will run at 1.65V?
• XMP Profile #1: D3-2000 CL9-11-9-27 @1.65V
• XMP Profile #2: D3-1866 CL9-11-9-27 @1.65V
What if I set my XMP Profile 2,and i manually set the DRAM voltage to 1.575V(That is the maximum 3770K can handle safely if i'm right).Now will this overwrite the 1.65V what was set in the XMP profile,but nothing else so it will run on 1866 Mhz with that timing or will the XMP profil overwrite this and my RAMS will run at 1.65V?
Facebook
Twitter
Instagram