Xp on amd fx how to make a floppy driver

graydust153

Proper
Apr 4, 2018
72
0
130
0
I just picked up a fx 8350 and a 78lmt-usb3 r2 motherboard. I was trying to make a flopy to install the sata/raid drivers but failed any tips

Btw I do have a flopy drive and flopy disks
 

cin19

Titan
Moderator
You can just use the USB. Download and extract the SATA RAID/AHCI driver zip file into the USB.

Then boot the PC with winxp disk, press <F6> as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID driver." Then plug the USB into the back panel USB port, browse to the location of the USB driver, then follow the on-screen instructions to install the SATA driver and winXP.
 

ASK THE COMMUNITY