Yellow-ish /Orange flickering ligths on the back of the ASUS motherboard

[lilium_bosniacum]

Hello,

I just finished building my first PC and encountered some issues. I've connected everything properly, the fans are working, the cooler is working, the GPU's fans are working... It boots me into BIOS ( Windows is not installed) and it seems that everything is alright except one thing - on the back of the motherboard there are yellow-ish/ orange lights that flicker slowly off and on.

I've built the PC from mostly new parts and some used ones like the CPU, GPU and the two RAM sticks ( Crucial DDR4 2133Mhz).

Specs:

CPU: i5 - 6400
GPU: Gigabyte 1050 TI OC
HD: WD Blue 1TB 7200 Rpm
PSU: Seasonic S12II 520W 80+ Bronze
RAM: Crucial 2x4GB 2133Mhz
MOBO: ASUS H110M-D

I'm really scared to continue using the PC. LED's light up and all but I'm really frightened and looking for any helpful suggestions.

Thanks in advance.

 

[DRagor]

Where exactly you see those lights? At the network port? That's normal.

 

[lilium_bosniacum]

Where exactly you see those lights? At the network port? That's normal.

At the back of the motherboard near the I/O shield. Multiple lights.

 

[Jesse_20]

MERGED QUESTION
Question from lilium_bosniacum : "Yellow-ish /Orange flickering ligths on the back of the ASUS motherboard"

Hello,

I just finished building my first PC and encountered some issues. I've connected everything properly, the fans are working, the cooler is working, the GPU's fans are working... It boots me into BIOS ( Windows is not installed) and it seems that everything is alright except one thing - on the back of the motherboard there are yellow-ish/ orange lights that flicker slowly off and on.

I've built the PC from mostly new parts and some used ones like the CPU, GPU and the two RAM sticks ( Crucial DDR4 2133Mhz).

Specs:

CPU: i5 - 6400
GPU: Gigabyte 1050 TI OC
HD: WD Blue 1TB 7200 Rpm
PSU: Seasonic S12II 520W 80+ Bronze
RAM: Crucial 2x4GB 2133Mhz
MOBO: ASUS H110M-D

I'm really scared to continue using the PC. LED's light up and all but I'm really frightened and looking for any helpful suggestions.

Thanks in advance.

Built-in led illumination (A.K.A Special Effects).
You can turn it off in the Bios if it bother you.

 

[DRagor]

There are two LEDs next to RJ45 port (above those 2 blue USB ports on the picture) - one is green, other is orange. If you talking about them, it's ok.

Also, on the PCB below I/O ports, there is orange line as shown on picture above that will light up in pulsing manner. It's also ok.