Hello everyone!
I am about to start with upgrading my computer, so I wanted to ask you for your advice and opinion. My plan was something like this:
- At this point my current configuration is:
Motherboard: Gigabyte M61PME-S2P / <removed>
CPU : AMD Athlon II X2 215 / <removed>
VGA : Radeon HD 6700 Series / <removed>
HDD: WDC WD50 (SATA) / <removed>
So I was about to do next:
- To buy:
Motherboard: GA-970A-DS3P / <removed>
RAM: DIMM DDR3 4GB 1866MHz Kingston HyperX Fury Black / <removed>
The point is that I would like to change my current motherboard & RAM, with those I wrote up here, and to keep using my current CPU and VGA for some time, until I decide to buy something better. New motherboard supports my current CPU, so I wouldn't have any problems with that, and my VGA is also PCI, so what would work like a charm. One thing, that could make some problems is that new motherboard needs AM3+ for 1866 Mhz DDR3, so does it means, that my HyperX will not work, or it will work @ 1600 Mhz?
My further plan is to upgrade CPU to FX-6300, an extra 4GB stick of RAM and VGA to some decent, too (with new power supply ofc). If I forgot to write something, feel free to tell me.
Thanks for your attention. I’m looking forward to your reply.
I am about to start with upgrading my computer, so I wanted to ask you for your advice and opinion. My plan was something like this:
- At this point my current configuration is:
Motherboard: Gigabyte M61PME-S2P / <removed>
CPU : AMD Athlon II X2 215 / <removed>
VGA : Radeon HD 6700 Series / <removed>
HDD: WDC WD50 (SATA) / <removed>
So I was about to do next:
- To buy:
Motherboard: GA-970A-DS3P / <removed>
RAM: DIMM DDR3 4GB 1866MHz Kingston HyperX Fury Black / <removed>
The point is that I would like to change my current motherboard & RAM, with those I wrote up here, and to keep using my current CPU and VGA for some time, until I decide to buy something better. New motherboard supports my current CPU, so I wouldn't have any problems with that, and my VGA is also PCI, so what would work like a charm. One thing, that could make some problems is that new motherboard needs AM3+ for 1866 Mhz DDR3, so does it means, that my HyperX will not work, or it will work @ 1600 Mhz?
My further plan is to upgrade CPU to FX-6300, an extra 4GB stick of RAM and VGA to some decent, too (with new power supply ofc). If I forgot to write something, feel free to tell me.
Thanks for your attention. I’m looking forward to your reply.