z-560's to STEREO reciever? ????

therealdeal316

Distinguished
Feb 18, 2003
7
0
18,510
Do you think it is possible to hook these speakers and woofer up to a PIONEER- VSX-D603S
AUDIO/VIDEO STEREO RECEIVER? I dont want to use the head phone jack, i'd like to hook these into an audio out.
<P ID="edit"><FONT SIZE=-1><EM>Edited by therealdeal316 on 02/19/03 01:00 PM.</EM></FONT></P>
 
Yes, as far as I know, you can just hook up the speakers to the line out on the receiver. You can also just hook the speakers independently into the speaker outs. However, if you do it in parallel (ie two speakers from one output), you need to make sure your receiver has enough current to drive both, otherwise it might sound like shizzz. However, I don't think this will be a problem.

The woofer would plug into either the line out or the sub out. However, I think the woofer just has a line in, so it would have to most likely be the line out on the receiver.

The easiest thing to do would be to hook up the line out of your receiver to the sound card's line in, then the speakers to the the sound card's line/speaker out. That way, you can have all the outputs from the receiver to the speakers. But this would only work if your computer was on.

XP 2500+ Barton
A7N8X Dlx
2x512MB Corsair PC3200
MSI GF3 Ti500 w/64MB DDR
16x DVD-ROM
2x80GB 7200RPM Maxtor
Onboard audio

My computer is bigger than your computer....