[SOLVED] Z390 Gaming Plus Loop Reboot after install extra nvme

Status
Not open for further replies.
Dec 4, 2020
6
0
10
Dec 4, 2020
6
0
10
it boot with just the 500gb?

take the 500gb out and just the 2TB in?

Only with the 500go it work well
I have to try only with the 2TO but there is no os on it.

When you installed Windows on that first NVMe boot SSD was the SATA drive connected?

Reconnect the SATA drive in any port that isn't SATA 2, 5 and 6 port.

Yes the second drive sata (3,5) was connected during the windows install.
I will try to reconnect it on a good sata port.
That can be the source of the issue ?
 
Dec 4, 2020
6
0
10
Yes it could explain your issue. If the SATA drive was connected when you installed the OS it could be possible that Windows installed the system boot files on that SATA instead of the NVMe.

I don't think so because I've already changed the sata disk since the installation of Windows and it always booted well.
Thank you for your help
 
Status
Not open for further replies.