[SOLVED] Z390 - Motherboard (Hard Drive shows in BIOS, but not under Boot Sequence in BIOS)

[g_nome]

Z390 Motherboard - I've setup EZ Raid on 2 extra drives on my PC and after rebooting it didn't want to boot-up back into Windows 10. After searching the Forum and tried all possible ways for the Z390 Motherboard, from Disabling CMS to Un-Plugging the Power-supply for 10 min... And then I disabled "Intel Rapid Storage Tech" in the Bios and rebooted... Pressing F12 on Boot-up I could see the Hard Drives again, but not in Boot Sequence in Bios... But it booted up again into Windows.

 

[popatim]

go to Advanced mode and make sure the Sata ports are set to AHCI.
Also disable Secure boot while you're in the bios.