I notice that every time my PC turns on, the Board goes through the Q-LED cycle 2 times.
The start sequence is as follows:
Start from Mains Power off (Cold Start)
Red CPU Light (0.5 Seconds)
Amber DRAM Light (1-1.5 Seconds)
White VGA Light (0 Seconds)
Cycle Restarts
Red CPU Light (0.5 Seconds)
Amber DRAM Light (1-1.5 Seconds)
White VGA Light (2-4 Seconds)
Green BOOT Light (3-5 Seconds)
Boot into Windows.
Start from Mains power On
Red CPU Light (0.5 Seconds)
Amber DRAM Light (0 Seconds)
Cycle Restarts
Red CPU Light (0.5 Seconds)
Amber DRAM Light (1-1.5 Seconds)
White VGA Light (2-4 Seconds)
Green BOOT Light (3-5 Seconds)
Boot into Windows.
The System Works Completely Fine No issues .
Any Help Would Be Appreciated.
Thanks.
The start sequence is as follows:
Start from Mains Power off (Cold Start)
Red CPU Light (0.5 Seconds)
Amber DRAM Light (1-1.5 Seconds)
White VGA Light (0 Seconds)
Cycle Restarts
Red CPU Light (0.5 Seconds)
Amber DRAM Light (1-1.5 Seconds)
White VGA Light (2-4 Seconds)
Green BOOT Light (3-5 Seconds)
Boot into Windows.
Start from Mains power On
Red CPU Light (0.5 Seconds)
Amber DRAM Light (0 Seconds)
Cycle Restarts
Red CPU Light (0.5 Seconds)
Amber DRAM Light (1-1.5 Seconds)
White VGA Light (2-4 Seconds)
Green BOOT Light (3-5 Seconds)
Boot into Windows.
The System Works Completely Fine No issues .
Any Help Would Be Appreciated.
Thanks.