- Jan 8, 2021
- 2
- 0
- 10
good afternoon everyone and happy new year
I purchased in October 2020
msi z490 tomahawk with nvme samsung evo plus 970 1tb and hdd 3.5 "1tb sataIII.
installation: nvme mounted on m2_1 and ssd on sata port3.
I omit the other components because they do not concern the problem.
the system worked for about 1 week then the famous NO BOOT:
bios did not see the nvme disk but only the sata disk on port3 (used only for photos / videos) ... so as if the nvme disk was dead ... but I did not believe it
so moved to port m2_2 and magically the system booted regularly. the bios saw the nvme disk on port m2_2.
samsung magician sotware did not find any errors on the disk ... fully functional
so I started the return of the motherboard which was immediately replaced with a new one.
just arrived, I reassembled everything and so finally the system worked for about 2 months .... yesterday no boot again
dead disk ... I enter the bios and can't see the nvme disk. reboot and magically restarts.
now it is working correctly!
maybe wrong configuration in the bios?
waiting for your reply .... THANKS
I purchased in October 2020
msi z490 tomahawk with nvme samsung evo plus 970 1tb and hdd 3.5 "1tb sataIII.
installation: nvme mounted on m2_1 and ssd on sata port3.
I omit the other components because they do not concern the problem.
the system worked for about 1 week then the famous NO BOOT:
bios did not see the nvme disk but only the sata disk on port3 (used only for photos / videos) ... so as if the nvme disk was dead ... but I did not believe it
so moved to port m2_2 and magically the system booted regularly. the bios saw the nvme disk on port m2_2.
samsung magician sotware did not find any errors on the disk ... fully functional
so I started the return of the motherboard which was immediately replaced with a new one.
just arrived, I reassembled everything and so finally the system worked for about 2 months .... yesterday no boot again
dead disk ... I enter the bios and can't see the nvme disk. reboot and magically restarts.
now it is working correctly!
maybe wrong configuration in the bios?
waiting for your reply .... THANKS
Facebook
Twitter
Instagram