- Mar 28, 2015
- 2
- 0
- 4,510
Intel z97 help:
Hey guys, I built a computer a few years ago. here is the part list:
https://pcpartpicker.com/list/nQTxpb
When I was first building the PC, it wouldn't turn on. I tried many things, until one thing worked, which was putting my 2x4gb g skill ram sticks in to the first and second memory channel. after some recent testing, I've come to the conclusion that slots 3 and 4 dont work- the computer will start up, flash the bios screen, start up the fan, but will then almost immediately after turn off. This has brought me problems, as the ram underperforms in its single-channel state. Has anyone run across this issue? please help me out. Thank you
edit: I see a lot of people talking about checking for bent pins, but it's quite the process to check for that, would you guys recommend changing around some voltage settings in the BIOS? If so, what should I change?
Hey guys, I built a computer a few years ago. here is the part list:
https://pcpartpicker.com/list/nQTxpb
When I was first building the PC, it wouldn't turn on. I tried many things, until one thing worked, which was putting my 2x4gb g skill ram sticks in to the first and second memory channel. after some recent testing, I've come to the conclusion that slots 3 and 4 dont work- the computer will start up, flash the bios screen, start up the fan, but will then almost immediately after turn off. This has brought me problems, as the ram underperforms in its single-channel state. Has anyone run across this issue? please help me out. Thank you
edit: I see a lot of people talking about checking for bent pins, but it's quite the process to check for that, would you guys recommend changing around some voltage settings in the BIOS? If so, what should I change?
Facebook
Twitter
Instagram