Zalman Passive NorthBridge Cooler

G

Guest

Guest
Archived from groups: alt.comp.hardware.overclocking (More info?)

Hi All,

I recently bought some Zalman components to make my PC a bit quieter,
including a passive Northbridge cooler. Unfortunately, my Motherboard
(Abit IC7) doesn't have the required mounting holes.
I found that it's possible to stick the cooling element to the NB chip
using thermal epoxy. Is this safe enough ? Do I risk breaking the chip, by
accidentally hitting the cooling element ?

greetings, TIA
Jurgen
 

frank

Distinguished
Dec 31, 2007
1,590
0
19,780
0
Archived from groups: alt.comp.hardware.overclocking (More info?)

I used thermal tape. Works great for me. However, mine is on the southbridge
chip. It was working warm without the sink. Now, it's cool. I presume you
would have the same results on the northbridge. Wait and see for other
replies.


"Jurgen" <annejurgen_REMOVEME@pandora.be> wrote in message
news:pan.2004.05.26.20.29.34.900000@pandora.be...
> Hi All,
>
> I recently bought some Zalman components to make my PC a bit quieter,
> including a passive Northbridge cooler. Unfortunately, my Motherboard
> (Abit IC7) doesn't have the required mounting holes.
> I found that it's possible to stick the cooling element to the NB chip
> using thermal epoxy. Is this safe enough ? Do I risk breaking the chip, by
> accidentally hitting the cooling element ?
>
> greetings, TIA
> Jurgen
>
 

JTS

Distinguished
Nov 1, 2001
89
0
18,630
0
Archived from groups: alt.comp.hardware.overclocking (More info?)

I didn't think the southbridge got hot.

"Frank" <Frankheon@hotmail.com> wrote in message
news:MN7tc.39277$G96.760531@wagner.videotron.net...
> I used thermal tape. Works great for me. However, mine is on the
southbridge
> chip. It was working warm without the sink. Now, it's cool. I presume you
> would have the same results on the northbridge. Wait and see for other
> replies.
>
>
> "Jurgen" <annejurgen_REMOVEME@pandora.be> wrote in message
> news:pan.2004.05.26.20.29.34.900000@pandora.be...
> > Hi All,
> >
> > I recently bought some Zalman components to make my PC a bit quieter,
> > including a passive Northbridge cooler. Unfortunately, my Motherboard
> > (Abit IC7) doesn't have the required mounting holes.
> > I found that it's possible to stick the cooling element to the NB chip
> > using thermal epoxy. Is this safe enough ? Do I risk breaking the chip,
by
> > accidentally hitting the cooling element ?
> >
> > greetings, TIA
> > Jurgen
> >
>
>
 

frank

Distinguished
Dec 31, 2007
1,590
0
19,780
0
Archived from groups: alt.comp.hardware.overclocking (More info?)

To the touch, my southbridge was pretty hot. Acording to my multimeter temp
sensor, it was around 40C. Now it's about 30-35C. However, with thermal
tape, it did a great job at cooling it, for me.

"JTS" <5er@comcast.net> wrote in message
news:_sedne_bDZ4evSjdRVn-vA@giganews.com...
> I didn't think the southbridge got hot.
>
> "Frank" <Frankheon@hotmail.com> wrote in message
> news:MN7tc.39277$G96.760531@wagner.videotron.net...
> > I used thermal tape. Works great for me. However, mine is on the
> southbridge
> > chip. It was working warm without the sink. Now, it's cool. I presume
you
> > would have the same results on the northbridge. Wait and see for other
> > replies.
> >
> >
> > "Jurgen" <annejurgen_REMOVEME@pandora.be> wrote in message
> > news:pan.2004.05.26.20.29.34.900000@pandora.be...
> > > Hi All,
> > >
> > > I recently bought some Zalman components to make my PC a bit quieter,
> > > including a passive Northbridge cooler. Unfortunately, my Motherboard
> > > (Abit IC7) doesn't have the required mounting holes.
> > > I found that it's possible to stick the cooling element to the NB chip
> > > using thermal epoxy. Is this safe enough ? Do I risk breaking the
chip,
> by
> > > accidentally hitting the cooling element ?
> > >
> > > greetings, TIA
> > > Jurgen
> > >
> >
> >
>
>
 

JTS

Distinguished
Nov 1, 2001
89
0
18,630
0
Archived from groups: alt.comp.hardware.overclocking (More info?)

Sounds good, Frank. That's a pretty decent temp reduction!


"Frank" <Frankheon@hotmail.com> wrote in message
news:6dbtc.39862$G96.945383@wagner.videotron.net...
> To the touch, my southbridge was pretty hot. Acording to my multimeter
temp
> sensor, it was around 40C. Now it's about 30-35C. However, with thermal
> tape, it did a great job at cooling it, for me.
>
> "JTS" <5er@comcast.net> wrote in message
> news:_sedne_bDZ4evSjdRVn-vA@giganews.com...
> > I didn't think the southbridge got hot.
> >
> > "Frank" <Frankheon@hotmail.com> wrote in message
> > news:MN7tc.39277$G96.760531@wagner.videotron.net...
> > > I used thermal tape. Works great for me. However, mine is on the
> > southbridge
> > > chip. It was working warm without the sink. Now, it's cool. I presume
> you
> > > would have the same results on the northbridge. Wait and see for other
> > > replies.
> > >
> > >
> > > "Jurgen" <annejurgen_REMOVEME@pandora.be> wrote in message
> > > news:pan.2004.05.26.20.29.34.900000@pandora.be...
> > > > Hi All,
> > > >
> > > > I recently bought some Zalman components to make my PC a bit
quieter,
> > > > including a passive Northbridge cooler. Unfortunately, my
Motherboard
> > > > (Abit IC7) doesn't have the required mounting holes.
> > > > I found that it's possible to stick the cooling element to the NB
chip
> > > > using thermal epoxy. Is this safe enough ? Do I risk breaking the
> chip,
> > by
> > > > accidentally hitting the cooling element ?
> > > >
> > > > greetings, TIA
> > > > Jurgen
> > > >
> > >
> > >
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.hardware.overclocking (More info?)

Thanks to all for the answers !

Jurgen

JTS wrote:
> Sounds good, Frank. That's a pretty decent temp reduction!
>
>
> "Frank" <Frankheon@hotmail.com> wrote in message
> news:6dbtc.39862$G96.945383@wagner.videotron.net...
>
>>To the touch, my southbridge was pretty hot. Acording to my multimeter
>
> temp
>
>>sensor, it was around 40C. Now it's about 30-35C. However, with thermal
>>tape, it did a great job at cooling it, for me.
>>
>>"JTS" <5er@comcast.net> wrote in message
>>news:_sedne_bDZ4evSjdRVn-vA@giganews.com...
>>
>>>I didn't think the southbridge got hot.
>>>
>>>"Frank" <Frankheon@hotmail.com> wrote in message
>>>news:MN7tc.39277$G96.760531@wagner.videotron.net...
>>>
>>>>I used thermal tape. Works great for me. However, mine is on the
>>>
>>>southbridge
>>>
>>>>chip. It was working warm without the sink. Now, it's cool. I presume
>>
>>you
>>
>>>>would have the same results on the northbridge. Wait and see for other
>>>>replies.
>>>>
>>>>
>>>>"Jurgen" <annejurgen_REMOVEME@pandora.be> wrote in message
>>>>news:pan.2004.05.26.20.29.34.900000@pandora.be...
>>>>
>>>>>Hi All,
>>>>>
>>>>>I recently bought some Zalman components to make my PC a bit
>
> quieter,
>
>>>>>including a passive Northbridge cooler. Unfortunately, my
>
> Motherboard
>
>>>>>(Abit IC7) doesn't have the required mounting holes.
>>>>>I found that it's possible to stick the cooling element to the NB
>
> chip
>
>>>>>using thermal epoxy. Is this safe enough ? Do I risk breaking the
>>
>>chip,
>>
>>>by
>>>
>>>>>accidentally hitting the cooling element ?
>>>>>
>>>>>greetings, TIA
>>>>>Jurgen
>>>>>
>>>>
>>>>
>>>
>>
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.hardware.overclocking (More info?)

Want a quite PC do what i did, i Zalmanised my PC, 7000A-Cu cpu
cooler, Northbridge heatsink and a Heatpipe cooler for my VID card :)

One 120mm fan at font 7 volts and adding on to the side,top and rear
:) when i get my new case as the case i have can't fit a 120mm at the
back, only two 80mm but thats fine all at 7 volts and 12volts at a
turn of a knob on my Vantec Fan controler, :), not totaly Zalmanised i
guess.

Hope this helps.


On Thu, 27 May 2004 07:14:55 GMT, Jurgen
<annejurgen_NOSPAM_@pandora.be> wrote:

>Thanks to all for the answers !
>
>Jurgen
>
>JTS wrote:
>> Sounds good, Frank. That's a pretty decent temp reduction!
>>
>>
>> "Frank" <Frankheon@hotmail.com> wrote in message
>> news:6dbtc.39862$G96.945383@wagner.videotron.net...
>>
>>>To the touch, my southbridge was pretty hot. Acording to my multimeter
>>
>> temp
>>
>>>sensor, it was around 40C. Now it's about 30-35C. However, with thermal
>>>tape, it did a great job at cooling it, for me.
>>>
>>>"JTS" <5er@comcast.net> wrote in message
>>>news:_sedne_bDZ4evSjdRVn-vA@giganews.com...
>>>
>>>>I didn't think the southbridge got hot.
>>>>
>>>>"Frank" <Frankheon@hotmail.com> wrote in message
>>>>news:MN7tc.39277$G96.760531@wagner.videotron.net...
>>>>
>>>>>I used thermal tape. Works great for me. However, mine is on the
>>>>
>>>>southbridge
>>>>
>>>>>chip. It was working warm without the sink. Now, it's cool. I presume
>>>
>>>you
>>>
>>>>>would have the same results on the northbridge. Wait and see for other
>>>>>replies.
>>>>>
>>>>>
>>>>>"Jurgen" <annejurgen_REMOVEME@pandora.be> wrote in message
>>>>>news:pan.2004.05.26.20.29.34.900000@pandora.be...
>>>>>
>>>>>>Hi All,
>>>>>>
>>>>>>I recently bought some Zalman components to make my PC a bit
>>
>> quieter,
>>
>>>>>>including a passive Northbridge cooler. Unfortunately, my
>>
>> Motherboard
>>
>>>>>>(Abit IC7) doesn't have the required mounting holes.
>>>>>>I found that it's possible to stick the cooling element to the NB
>>
>> chip
>>
>>>>>>using thermal epoxy. Is this safe enough ? Do I risk breaking the
>>>
>>>chip,
>>>
>>>>by
>>>>
>>>>>>accidentally hitting the cooling element ?
>>>>>>
>>>>>>greetings, TIA
>>>>>>Jurgen
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>>
 

magoo

Distinguished
May 28, 2004
33
0
18,530
0
Archived from groups: alt.comp.hardware.overclocking (More info?)

On Fri, 28 May 2004 00:06:47 +1000, We Live for the One we Die for the
One <Mr fred@yahoo.com.au> wrote:

>
>Want a quite PC do what i did, i Zalmanised my PC, 7000A-Cu cpu
>cooler, Northbridge heatsink and a Heatpipe cooler for my VID card :)
>
>One 120mm fan at font 7 volts and adding on to the side,top and rear
>:) when i get my new case as the case i have can't fit a 120mm at the
>back, only two 80mm but thats fine all at 7 volts and 12volts at a
>turn of a knob on my Vantec Fan controler, :), not totaly Zalmanised i
>guess.
>
>Hope this helps.


Was just playing around with prime95 and speedfan.


cpu fan fast, case fans fast 42C

cpu fan slow, case fans fast 44C

cpu fan fast, case fans slow 45C

cpu fan slow, case fans slow 46C


Might as well run slow/quiet, not that much difference for all the
noise.
 
G

Guest

Guest
Archived from groups: alt.comp.hardware.overclocking (More info?)

I got the speed controller with the cpu fan have not tried the cpu on
low yet, would makemy pc REALY silent on low, its 38c now so i would
only expect 5 degress difference on low i would think.


On Fri, 28 May 2004 06:53:39 -0700, magoo@deafndumb.com wrote:

>On Fri, 28 May 2004 00:06:47 +1000, We Live for the One we Die for the
>One <Mr fred@yahoo.com.au> wrote:
>
>>
>>Want a quite PC do what i did, i Zalmanised my PC, 7000A-Cu cpu
>>cooler, Northbridge heatsink and a Heatpipe cooler for my VID card :)
>>
>>One 120mm fan at font 7 volts and adding on to the side,top and rear
>>:) when i get my new case as the case i have can't fit a 120mm at the
>>back, only two 80mm but thats fine all at 7 volts and 12volts at a
>>turn of a knob on my Vantec Fan controler, :), not totaly Zalmanised i
>>guess.
>>
>>Hope this helps.
>
>
>Was just playing around with prime95 and speedfan.
>
>
>cpu fan fast, case fans fast 42C
>
>cpu fan slow, case fans fast 44C
>
>cpu fan fast, case fans slow 45C
>
>cpu fan slow, case fans slow 46C
>
>
>Might as well run slow/quiet, not that much difference for all the
>noise.
>
 
Thread starter Similar threads Forum Replies Date
G Overclocking 3

Similar threads