Zalman Z3 Plus Any 240mm Radiator?

[HappyHambo]

Super simple question, is there anyway to put a 240mm radiator into a Zalman Z3 Plus case? I know that the screws on the top of the case will not go through a radiator with fans.

Any help is greatly appreciated!

 

[Spectre694]

It looks doable but Zalman doesn't say on their website so you are physically going to have to measure the space in the roof and see if you'll be able to fit a rad there.

 

[HappyHambo]

It looks doable but Zalman doesn't say on their website so you are physically going to have to measure the space in the roof and see if you'll be able to fit a rad there.

Thanks for the reply. I have a feeling that a 240mm radiator will fit but its the screw hole's that are too small to put a screw all the way through the radiator and the fan. When I buy the case I will be sure to check the front too because I think that will work. Looks like i'll be getting a Hyper 212 Evo to start or maybe even a Cooler Master Sedion V2.

 

[Spectre694]

It looks doable but Zalman doesn't say on their website so you are physically going to have to measure the space in the roof and see if you'll be able to fit a rad there.

Thanks for the reply. I have a feeling that a 240mm radiator will fit but its the screw hole's that are too small to put a screw all the way through the radiator and the fan. When I buy the case I will be sure to check the front too because I think that will work. Looks like i'll be getting a Hyper 212 Evo to start or maybe even a Cooler Master Sedion V2.

Your RAD should come with longer screws. to go through both. Even if it doesn't you can pick those up cheap.

 

[HappyHambo]

It looks doable but Zalman doesn't say on their website so you are physically going to have to measure the space in the roof and see if you'll be able to fit a rad there.

Thanks for the reply. I have a feeling that a 240mm radiator will fit but its the screw hole's that are too small to put a screw all the way through the radiator and the fan. When I buy the case I will be sure to check the front too because I think that will work. Looks like i'll be getting a Hyper 212 Evo to start or maybe even a Cooler Master Sedion V2.

Your RAD should come with longer screws. to go through both. Even if it doesn't you can pick those up cheap.

Really? This chap says it won't? https://www.youtube.com/watch?v=jhMiEGzwds0

 

[Spectre694]

It looks doable but Zalman doesn't say on their website so you are physically going to have to measure the space in the roof and see if you'll be able to fit a rad there.

Thanks for the reply. I have a feeling that a 240mm radiator will fit but its the screw hole's that are too small to put a screw all the way through the radiator and the fan. When I buy the case I will be sure to check the front too because I think that will work. Looks like i'll be getting a Hyper 212 Evo to start or maybe even a Cooler Master Sedion V2.

Your RAD should come with longer screws. to go through both. Even if it doesn't you can pick those up cheap.

Really? This chap says it won't? https://www.youtube.com/watch?v=jhMiEGzwds0

Just watched it. The problem wasn't that the screws weren't long enough it was that the screw holes weren't tapped all the way through so the screw bottoms out instead of going all the way through the hole.

 

[HappyHambo]

It looks doable but Zalman doesn't say on their website so you are physically going to have to measure the space in the roof and see if you'll be able to fit a rad there.

Thanks for the reply. I have a feeling that a 240mm radiator will fit but its the screw hole's that are too small to put a screw all the way through the radiator and the fan. When I buy the case I will be sure to check the front too because I think that will work. Looks like i'll be getting a Hyper 212 Evo to start or maybe even a Cooler Master Sedion V2.

Your RAD should come with longer screws. to go through both. Even if it doesn't you can pick those up cheap.

Really? This chap says it won't? https://www.youtube.com/watch?v=jhMiEGzwds0

Just watched it. The problem wasn't that the screws weren't long enough it was that the screw holes weren't tapped all the way through so the screw bottoms out instead of going all the way through the hole.

Ah, all right. I'll probably just get a 120mm radiator, thanks for the help anyway