Question ZOTAC RTX 2060 FAN CONTROL

[Drabotski]

My new RTX ZOTAC 2060 AMP, i cant control the speed of my no 2 FAN manually in FireStrom, even in EVGA Precision its show only FAN no 1, theres no FAN no 2, i try manually change the speed in MSI afterburner but only FAN no 1 was speeding up, is it Normal?

When i play game or idle, the FAN no 2 spinning with slow/medium speed and remain unchanged, even the FAN no 1 rising the speed, is it Normal,

is just like only FAN no 1 doing the hardwork, and FAN no 2 doing the slow work

i tested it with TITANFALL 2 1080p 144hz win 10 pro latest version, 144 fps avg temp 70c, max 74c, but the FAN no 2 speed still slow not changing at all, just like idle

sorry for my bad english

thank you

 

[JohnBonhamsGhost]

they are both linked to the same setting. it's just a bad idea by Zotac to show it this way in the GUI. both will be running at the stats shown under 1.
watch the card as it in use; you will see both functioning similarly.
if one really isn't spinning you have a definite hardware issue with the card.

 

[Drabotski]

they are both linked to the same setting. it's just a bad idea by Zotac to show it this way in the GUI. both will be running at the stats shown under 1.
watch the card as it in use; you will see both functioning similarly.
if one really isn't spinning you have a definite hardware issue with the card.

so, both FAN should spinning with same speed, if not then i have to returnt it then,

i tried manually put 100% speed but only FAN 1 work, the other FAN just spinning slow, as it in use is all the same, FAN no 2 spinning slower when FAN 1 spinning faster

so i think my card got some issues

 

[Metal Messiah.]

Which Power Supply unit are you using to power this RTX GPU ? List the make/model number. Have you first tried doing a CLEAN re-install of any overclocking tool, be it MSI AB, GPU tweak, PrecisionX etc. ? Just try and see what happens.

First remove and delete ALL previous saved fan curves, profiles, and other OC settings of your GPU, and then do a clean re-install of the GPU drivers, as well as the OC tool. Try to re-seat the GPU back on the PCI-e x16 slot, and make sure all PCI-e cables are connected as well.

Check for any dust settled on the GPU fans, and the PCB.

 

[Drabotski]

Which Power Supply unit are you using to power this RTX GPU ? List the make/model number. Have you first tried doing a CLEAN re-install of any overclocking tool, be it MSI AB, GPU tweak, PrecisionX etc. ? Just try and see what happens.

First remove and delete ALL previous saved fan curves, profiles, and other OC settings of your GPU, and then do a clean re-install of the GPU drivers, as well as the OC tool. Try to re-seat the GPU back on the PCI-e x16 slot, and make sure all PCI-e cables are connected as well.

Check for any dust settled on the GPU fans, and the PCB.

im using seasonic x650 gold

in FireStrom that shown only FAN 1 can be control, i look online, and its normal

but the question is, is it normal that my no 2 FAN is spinning far slower than FAN 1 when its on use, like playing game or when i tried do 100% speed in firestrom only FAN 1 response, FAN 2 still spinning slow


i tried reseat the GPU, its not work

 

[Kamal007v]

My Zotac RTX 2060 TWIN FAN does the same. I don't think it's a faulty unit because it's the same for my friend and i read the same online. Idk why it's like that!

 

[Drabotski]

My Zotac RTX 2060 TWIN FAN does the same. I don't think it's a faulty unit because it's the same for my friend and i read the same online. Idk why it's like that!

so your FAN 1 also lot faster than your FAN 2

 

[Kamal007v]

Yes it is. I came across some posts about this even in a triple fan card one of them operates independent as far as i heard. It's certainly not helping my card. My GPU would hit the max 83 degrees stated by the manufacturer in like 10 minutes if i don't have my AC on be it whatever game which resulted in a fat electricity bill i have never seen in my entire life. I'm past the return window Idk i wanna sell this and buy something else later.

 

[JohnBonhamsGhost]

contact Zotac via phone if possible and see what they tell you the options are.
also contact the retailer if need be and request a refund. i wouldn't give them all the facts about the fan issue. if it's already come up multiple times and is known, there's a possibility they may just state that the card is functioning properly and it's up to you to cool the system more aggressively.

...I'm past the return window Idk i wanna sell this and buy something else later.

if Zotac isn't commenting about releasing a software fix or recalling the cards I would sell them ASAP before word starts getting around about the problem. while they're still in "Like New" condition you shouldn't hit too big of a loss on them.