Recent content by Iamsoda

I'm trying to troubleshoot a system that randomly stopped booting and I'm not sure what my next step is. Specs: Ryzen 7 5800x cpu Asus tuff gaming X570 wifi plus Mobo 2x8 dd4 Corsair Vengeance EVGA 750 G5 PSU Samsung 1tb 870 evo SSD RTX 3080 NVidia founders edition So about a month ago I...

I actually just disabled the CPU fan rpm monitor in the bios. Since it really doesn't matter where the fans are located as the water temp is what matters. Which gets me to another question. I was thinking do I need a flow meter...

Yeah, my recovery and idle temps got so much better today when I removed the radiator fans from the CPU header and moved them to another fan header. Now everything is running off water temps only. Its also much quieter as the fans aren't ramping up and down at all. My water idles around 28-30c...

Thanks I got lucky as any port can be inlet or outlet according to the manual. https://www.ekwb.com/shop/EK-IM/EK-IM-3831109810477.pdf My temps are really good. The gpu peaks at 35c under load and 40c under benchmark. The cpu hits about 60-70c under benchmark and 60c under load. Water is around...

Here is an update with finished product. https://cdn.discordapp.com/attachments/549698447779954688/579795586002190352/20190519_162544.jpg

I also purchased 2 radiators on ebay that are not on that list. I might be over doing it. 140mm rad on top back and 280mm slim rad on roof as well as the 240mm 45mm ce on front. I did a pretty close job of measuring all the fans, radiators, pump/res etc and according to the manufactures specs, I...

I've read that loop order doesn't matter as long as you have enough flow because the temp doesn't vary much?

Thank you I really appreciate the advice. I am a plumber as a profession so hopefully that makes this more straightforward. I just finished my order and added a few more things onto it. I'll post pics when I'm done.

Hi first time doing a liquid cooling setup. I"m using all EK parts. I have an nzxt h440, 7700k (5.2ghertz), and rtx 2080 ti. I am water cooling for performance and noise levels. I going for a soft tube setup. Here is the parts list I have so far...

Hi was I was looking into to doing liquid cooling for the first time in my system to reduce noise and increase cooling performance. My current specs are i7 7700k 5.2ghertz cooled with corsair h110, 16 gig ddr4, gigabyte aurous Mobo, Samsung 970 pro 500gig, Samsung 850 evo TB, 4x WD blue caviar...

gonna try the windows 10 install again. If not a clean install of 8.1 I can try. I'm so glad I have multiple backups, clones, and cloud images.

Had windows 8.1, ran the upgrade to windows 10 and now when I hit the login screen it says welcome and loops back to login. Is there any fix to this? Can I just fresh install windows 10 and put my windows 8 image on top of that?